Greater Manchester · England
Bollard removal in Hyde
Bollard removal jobs supplied and fitted in Hyde, Greater Manchester: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout bollard removal jobs in Hyde
From schools, residential driveways and community car parks, Hyde has plenty of places where bollard removal jobs earn their keep. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We work across SK14 — Hyde itself and places including Hattersley, Mottram in Longdendale, Hollingworth and Broadbottom. Jobs in Hyde can be combined with work in Denton (1.6 miles), Dukinfield (1.7 miles), Stalybridge (2.4 miles) and Ashton-under-Lyne (2.7 miles) (straight-line distances). Hyde is about 6 miles from Oldham.
Local details
- Area
- Greater Manchester, England
- Highway authority
- Tameside Council (local roads)
- Planning authority
- Tameside Council
- Postcodes
- SK14
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
- Nearby
- Denton (1.6 mi), Dukinfield (1.7 mi), Stalybridge (2.4 mi), Ashton-under-Lyne (2.7 mi)
Hyde: typical bollard removal prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£335 + VAT · £275–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -2% for North West. Guide only — the fixed price follows a survey.
Typical bollard removal jobs requests in Hyde
Typical reasons for bollard removal jobs in Hyde:
- Car park and forecourt redesigns
- Access routes no longer needing control
- Decommissioning automatic bollards that are no longer used
What we check first in Hyde
In Hyde, work on adopted pavements and verges needs consent from Tameside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Tameside Council) first — we flag this at survey.
Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface. Foundations are rarely the size anyone expects.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Finishes and options
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
What affects the quote
When we price bollard removal jobs in Hyde, these make the biggest difference:
- Number and type of bollards
- Access, working hours and waste disposal
- Electrical isolation and hydraulic drain-down
Keeping them working
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out.
We can also service, repair or replace existing posts anywhere in Hyde.
Common questions
Do you carry out bollard removal jobs in Hyde?
We cover all of Hyde (SK14) and the rest of Greater Manchester. We also work in Denton, Dukinfield and Stalybridge.
Who gives permission for bollards on the pavement in Hyde?
The highway authority for local roads in Hyde is Tameside Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do bollard removal jobs cost in Hyde?
In Hyde, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Bollard removal near Hyde
- Denton (1.6 mi)
- Dukinfield (1.7 mi)
- Stalybridge (2.4 mi)
- Ashton-under-Lyne (2.7 mi)
- Droylsden (3.4 mi)
- Stockport (4.3 mi)