Hertfordshire · England
Bollard removal in Rickmansworth
Bollard removal jobs supplied and fitted in Rickmansworth, Hertfordshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRickmansworth bollard removal jobs
Bollard removal jobs suit plenty of Rickmansworth sites, local parades, small industrial units and community car parks among them. Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match.
Coverage in Rickmansworth takes in the WD3 and WD5 postcode districts and nearby places like Chorleywood, Maple Cross, Sarratt and Chandler's Cross. Nearby, we also work in Watford (3.7 miles), Chalfont St Peter (4 miles), Bushey (5 miles) and Gerrards Cross (5 miles), measured as the crow flies. Luton is around 17 miles away.
Key facts for this area
- Area
- Hertfordshire, England
- Highway authority
- Hertfordshire County Council (local roads)
- Planning authority
- the council for Three Rivers
- Postcodes
- WD3 and WD5
- Guide price
- Typically £80–£355 per post + VAT (£95–£425 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
- Nearby
- Watford (3.7 mi), Chalfont St Peter (4 mi), Bushey (5 mi), Gerrards Cross (5 mi)
Common reasons for bollard removal jobs in Rickmansworth
What bollard removal jobs usually sort out in Rickmansworth:
- Car park and forecourt redesigns
- Taking out broken stubs and empty sockets
- Moving bollards to new positions on the same site
Guide prices for Rickmansworth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£195 + VAT · £95–£225 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£275 + VAT · £195–£325 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £245–£355 + VAT · £285–£425 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +3% for East of England. Guide only — the fixed price follows a survey.
Before we dig in Rickmansworth
The highway authority for local roads in Rickmansworth is Hertfordshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Three Rivers) first — we flag this at survey.
Foundations are rarely the size anyone expects. Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Specification choices
| Option | Detail |
|---|---|
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
What affects the quote
Two Rickmansworth jobs with the same number of posts can price quite differently. The usual reasons:
- Cutting off or full foundation extraction
- Access, working hours and waste disposal
- Surface type and reinstatement
Looking after them
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out.
We can also service, repair or replace existing posts anywhere in Rickmansworth.
Common questions
Can you carry out bollard removal jobs anywhere in Rickmansworth?
We cover all of Rickmansworth (WD3 and WD5) and the rest of Hertfordshire. We also work in Watford, Chalfont St Peter and Bushey.
Who gives permission for bollards on the pavement in Rickmansworth?
The highway authority for local roads in Rickmansworth is Hertfordshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do bollard removal jobs cost in Rickmansworth?
In Rickmansworth, typically £80–£355 per post removed with footing, surface made good, plus VAT (£95–£425 including VAT for homeowners), with a minimum job of £295 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Can removed bollards be reused elsewhere on site?
Often, if they come out undamaged. Steel posts and removable bollards relocate well. New foundations are formed at the new positions.
Bollard removal near Rickmansworth
- Watford (3.7 mi)
- Chalfont St Peter (4 mi)
- Bushey (5 mi)
- Gerrards Cross (5 mi)
- Amersham (6.3 mi)
- Chesham (6.7 mi)