Buckinghamshire · England
Bollard removal in Amersham
Local installation of bollard removal jobs in Amersham — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAmersham bollard removal jobs
Whether it's small industrial units, local parades and community buildings, bollard removal jobs in Amersham are planned around who needs to get through and who doesn't. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We cover Amersham's HP7, HP6 and HP16 postcode districts, including places such as Little Chalfont, Winchmore Hill, Penn Street and Mop End. Jobs in Amersham can be combined with work in Chesham (2.4 miles), Chalfont St Peter (4.8 miles), Gerrards Cross (6.2 miles) and High Wycombe (6.3 miles) (straight-line distances). It sits roughly 17 miles from Luton as the crow flies.
Amersham at a glance
- Area
- Buckinghamshire, England
- Highway authority
- Buckinghamshire Council (local roads)
- Planning authority
- Buckinghamshire Council
- Postcodes
- HP7, HP6 and HP16
- Guide price
- Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
- Survey
- Free, with a fixed written quote
- Nearby
- Chesham (2.4 mi), Chalfont St Peter (4.8 mi), Gerrards Cross (6.2 mi), High Wycombe (6.3 mi)
Typical bollard removal jobs requests in Amersham
What bollard removal jobs usually sort out in Amersham:
- Decommissioning automatic bollards that are no longer used
- Moving bollards to new positions on the same site
- Clearing old bollards before resurfacing
Amersham: typical bollard removal prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £85–£205 + VAT · £95–£245 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£285 + VAT · £195–£335 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £255–£365 + VAT · £305–£435 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Amersham
Buckinghamshire Council is the highway authority covering Amersham's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Amersham need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Buckinghamshire Council before posts go in.
Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first. Foundations are rarely the size anyone expects.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
What happens on site
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Specification choices
| Option | Detail |
|---|---|
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
Pricing bollard removal jobs in Amersham
Two Amersham jobs with the same number of posts can price quite differently. The usual reasons:
- Cutting off or full foundation extraction
- Number and type of bollards
- Access, working hours and waste disposal
After installation
After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out. Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled.
We can also service, repair or replace existing posts anywhere in Amersham.
Common questions
Can you carry out bollard removal jobs anywhere in Amersham?
We cover all of Amersham (HP7, HP6 and HP16) and the rest of Buckinghamshire. We also work in Chesham, Chalfont St Peter and Gerrards Cross.
Who gives permission for bollards on the pavement in Amersham?
Buckinghamshire Council is the highway authority covering Amersham's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do bollard removal jobs cost in Amersham?
In Amersham, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Bollard removal in nearby towns
- Chesham (2.4 mi)
- Chalfont St Peter (4.8 mi)
- Gerrards Cross (6.2 mi)
- High Wycombe (6.3 mi)
- Rickmansworth (6.3 mi)
- Berkhamsted (6.8 mi)