Bollard Installers

Buckinghamshire · England

Bollard removal in High Wycombe

Bollard removal jobs supplied and fitted in High Wycombe, Buckinghamshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.

Neat excavation in block paving where a bollard was removed, the old post and concrete root lying beside it, cones and barrier aroundComputer-generated image

High Wycombe bollard removal jobs

In the town of High Wycombe, bollard removal jobs tend to go in at retail parks, leisure centres and college campuses. Posts can be cut off at or below ground level or fully extracted with their concrete.

We cover High Wycombe's HP11, HP13, HP12, HP10, HP15 and SL8 postcode districts, including places such as Loudwater, Downley, Flackwell Heath and Wooburn Green. Nearby, we also work in Amersham (6.3 miles), Maidenhead (7.5 miles), Chesham (8.1 miles) and Chalfont St Peter (8.4 miles), measured as the crow flies. It sits roughly 15 miles from Reading as the crow flies.

High Wycombe at a glance

Area
Buckinghamshire, England
Highway authority
Buckinghamshire Council (local roads)
Planning authority
Buckinghamshire Council
Postcodes
HP11, HP13, HP12, HP10, HP15, SL8, SL7 and HP14
Guide price
Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
Survey
Free, with a fixed written quote
Nearby
Amersham (6.3 mi), Maidenhead (7.5 mi), Chesham (8.1 mi), Chalfont St Peter (8.4 mi)

High Wycombe: typical bollard removal prices

SpecificationGuide priceIncludes
Standard£85–£205 + VAT · £95–£245 inc VATPost out, hole backfilled, simple surface
Upgraded£165–£285 + VAT · £195–£335 inc VATFooting removed, tarmac or block paving reinstated
Premium£255–£365 + VAT · £305–£435 inc VATLarge footing, concrete or natural stone reinstated

Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.

Why High Wycombe sites book bollard removal jobs

Typical reasons for bollard removal jobs in High Wycombe:

  • Removing redundant lighting bollards
  • Clearing old bollards before resurfacing
  • Access routes no longer needing control

Permissions and groundwork in High Wycombe

In High Wycombe, work on adopted pavements and verges needs consent from Buckinghamshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.

If your site in High Wycombe is listed or inside a conservation area, check with the local planning authority (Buckinghamshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.

Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.

  • Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
  • In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.

How the job runs

Survey what is in the ground

The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.

Make supplies safe

For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.

Remove posts and foundations

Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.

Options to consider

OptionDetail
Lighting bollard removalSupply made dead and cables terminated or removed by a qualified electrician before posts are lifted.
Automatic bollard decommissioningElectrical isolation, hydraulic drain-down, cassette removal and capping of ducts.
Full extractionPost and foundation broken out, leaving clear ground for resurfacing or new works.

What affects the quote

Our South East guide prices are a starting point; the survey in High Wycombe firms them up. What tends to move them:

  • Access, working hours and waste disposal
  • Number and type of bollards
  • Surface type and reinstatement

Looking after them

Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.

If posts in High Wycombe are later hit or damaged, we can repair or replace them — see bollard repairs.

Bollard removal in High Wycombe: FAQs

Do you carry out bollard removal jobs in High Wycombe?

We cover all of High Wycombe (HP11, HP13, HP12, HP10, HP15 and SL8) and the rest of Buckinghamshire. We also work in Amersham, Maidenhead and Chesham.

Do I need consent for bollards on a public footway in High Wycombe?

In High Wycombe, work on adopted pavements and verges needs consent from Buckinghamshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.

What's a typical price for bollard removal jobs in High Wycombe?

In High Wycombe, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.

Should bollards be cut off or fully removed?

Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.

Will the surface look patched after removal?

On block paving it can be nearly invisible, as the blocks are relaid. Tarmac, resin and concrete usually show a patch, especially on older weathered surfaces. Timing removal before resurfacing avoids that.

Bollard removal in nearby towns

Other bollard services in High Wycombe

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote