Bollard Installers

England · 8 towns

Bollard removal in Buckinghamshire

Bollard removal for sites across Buckinghamshire: surveyed, quoted in writing and installed by our crews.

Neat excavation in block paving where a bollard was removed, the old post and concrete root lying beside it, cones and barrier aroundComputer-generated image

Bollard removal in Buckinghamshire

Across Buckinghamshire, typical sites for bollard removal jobs include distribution parks, pedestrianised streets and stadium approaches. Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match.

Highway authorities for local roads in Buckinghamshire: Buckinghamshire Council and Milton Keynes City Council.

Choose your town in Buckinghamshire

Guide prices in Buckinghamshire

SpecificationGuide priceIncludes
Standard£85–£205 + VAT · £95–£245 inc VATPost out, hole backfilled, simple surface
Upgraded£165–£285 + VAT · £195–£335 inc VATFooting removed, tarmac or block paving reinstated
Premium£255–£365 + VAT · £305–£435 inc VATLarge footing, concrete or natural stone reinstated

Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.

Local authorities across Buckinghamshire

TownHighway / roads authorityPlanning authority
Milton KeynesMilton Keynes City CouncilMilton Keynes City Council
High WycombeBuckinghamshire CouncilBuckinghamshire Council
AylesburyBuckinghamshire CouncilBuckinghamshire Council
BletchleyMilton Keynes City CouncilMilton Keynes City Council
AmershamBuckinghamshire CouncilBuckinghamshire Council
CheshamBuckinghamshire CouncilBuckinghamshire Council
Gerrards CrossBuckinghamshire CouncilBuckinghamshire Council
Chalfont St PeterBuckinghamshire CouncilBuckinghamshire Council

Rules for bollard removal jobs in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first.

Details and sources: bollard rules in England.

How installation works

Survey what is in the ground

The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.

Check consents and reasons

Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.

Remove posts and foundations

Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.

Backfill and reinstate

Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.

Bollard removal in Buckinghamshire: FAQs

Do you cover all of Buckinghamshire for bollard removal jobs?

Yes — including Milton Keynes, High Wycombe, Aylesbury, Bletchley, Amersham, Chesham, Gerrards Cross and Chalfont St Peter. Enter your postcode in the price calculator to confirm.

How much do bollard removal jobs cost in Buckinghamshire?

In Buckinghamshire, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Buckinghamshire?

For local roads, Buckinghamshire Council and Milton Keynes City Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Will the surface look patched after removal?

On block paving it can be nearly invisible, as the blocks are relaid. Tarmac, resin and concrete usually show a patch, especially on older weathered surfaces. Timing removal before resurfacing avoids that.

Can automatic bollards be removed safely?

Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.

Other services in Buckinghamshire

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote