Buckinghamshire · England
Bollard removal in Aylesbury
Local installation of bollard removal jobs in Aylesbury — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAylesbury bollard removal jobs
Bollard removal jobs suit plenty of Aylesbury sites, local parades, community car parks and high street shopfronts among them. Posts can be cut off at or below ground level or fully extracted with their concrete.
We work across HP20, HP19, HP21, HP18, HP22 and HP17 — Aylesbury itself and places including Long Crendon, Waddesdon, Chearsley and Brill. Nearby, we also work in Leighton Buzzard (9.6 miles), Berkhamsted (11.3 miles), Chesham (12.2 miles) and Bletchley (12.7 miles), measured as the crow flies. Milton Keynes is around 16 miles away.
Local details
- Area
- Buckinghamshire, England
- Highway authority
- Buckinghamshire Council (local roads)
- Planning authority
- Buckinghamshire Council
- Postcodes
- HP20, HP19, HP21, HP18, HP22 and HP17
- Guide price
- Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
- Survey
- Free, with a fixed written quote
- Nearby
- Leighton Buzzard (9.6 mi), Berkhamsted (11.3 mi), Chesham (12.2 mi), Bletchley (12.7 mi)
Typical bollard removal jobs requests in Aylesbury
Typical reasons for bollard removal jobs in Aylesbury:
- Moving bollards to new positions on the same site
- Access routes no longer needing control
- Decommissioning automatic bollards that are no longer used
Guide prices for Aylesbury
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £85–£205 + VAT · £95–£245 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£285 + VAT · £195–£335 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £255–£365 + VAT · £305–£435 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Aylesbury
The highway authority for local roads in Aylesbury is Buckinghamshire Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Aylesbury need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Buckinghamshire Council before posts go in.
Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first. Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
From survey to handover
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Options to consider
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
What moves the price in Aylesbury
When we price bollard removal jobs in Aylesbury, these make the biggest difference:
- Size of foundations and amount of spoil
- Access, working hours and waste disposal
- Surface type and reinstatement
Looking after them
After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
If posts in Aylesbury are later hit or damaged, we can repair or replace them — see bollard repairs.
Bollard removal in Aylesbury: FAQs
Do you carry out bollard removal jobs in Aylesbury?
We cover all of Aylesbury (HP20, HP19, HP21, HP18, HP22 and HP17) and the rest of Buckinghamshire. We also work in Leighton Buzzard, Berkhamsted and Chesham.
Who gives permission for bollards on the pavement in Aylesbury?
In Aylesbury, work on adopted pavements and verges needs consent from Buckinghamshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do bollard removal jobs cost in Aylesbury?
In Aylesbury, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Bollard removal in nearby towns
- Leighton Buzzard (9.6 mi)
- Berkhamsted (11.3 mi)
- Chesham (12.2 mi)
- Bletchley (12.7 mi)
- Dunstable (13.3 mi)
- High Wycombe (13.3 mi)