Lancashire · England
Bollard removal in Chorley
Bollard removal jobs for sites across Chorley and the rest of Lancashire, from the first measurement to the last relaid paving block.
Computer-generated imageChorley bollard removal jobs
Whether it's small industrial units, schools and residential driveways, bollard removal jobs in Chorley are planned around who needs to get through and who doesn't. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
Coverage in Chorley takes in the PR6 and PR7 postcode districts and nearby places like Adlington, Whittle-le-Woods, Brinscall and Withnell. Jobs in Chorley can be combined with work in Leyland (4.4 miles), Darwen (7 miles), Wigan (7.4 miles) and Westhoughton (7.9 miles) (straight-line distances). Chorley is about 9 miles from Preston.
Local details
- Area
- Lancashire, England
- Highway authority
- Lancashire County Council (local roads)
- Planning authority
- the council for Chorley
- Postcodes
- PR6 and PR7
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
- Nearby
- Leyland (4.4 mi), Darwen (7 mi), Wigan (7.4 mi), Westhoughton (7.9 mi)
What bollard removal jobs cost in Chorley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£335 + VAT · £275–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -2% for North West. Guide only — the fixed price follows a survey.
Typical bollard removal jobs requests in Chorley
What bollard removal jobs usually sort out in Chorley:
- Access routes no longer needing control
- Taking out broken stubs and empty sockets
- Clearing old bollards before resurfacing
Consents, ground and services in Chorley
The highway authority for local roads in Chorley is Lancashire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Chorley is listed or inside a conservation area, check with the local planning authority (the council for Chorley) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Finishes and options
| Option | Detail |
|---|---|
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
What affects the quote
Two Chorley jobs with the same number of posts can price quite differently. The usual reasons:
- Access, working hours and waste disposal
- Cutting off or full foundation extraction
- Number and type of bollards
Looking after them
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
We can also service, repair or replace existing posts anywhere in Chorley.
Questions about bollard removal jobs in Chorley
Do you carry out bollard removal jobs in Chorley?
We cover all of Chorley (PR6 and PR7) and the rest of Lancashire. We also work in Leyland, Darwen and Wigan.
Who gives permission for bollards on the pavement in Chorley?
In Chorley, work on adopted pavements and verges needs consent from Lancashire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for bollard removal jobs in Chorley?
In Chorley, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Will the surface look patched after removal?
On block paving it can be nearly invisible, as the blocks are relaid. Tarmac, resin and concrete usually show a patch, especially on older weathered surfaces. Timing removal before resurfacing avoids that.