Lancashire · England
Steel security bollard installation in Chorley
Local installation of steel security bollards in Chorley — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout steel security bollards in Chorley
Whether it's schools, community car parks and filling-station forecourts, steel security bollards in Chorley are planned around who needs to get through and who doesn't. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
We work across PR6 and PR7 — Chorley itself and places including Adlington, Whittle-le-Woods, Brinscall and Withnell. Nearby, we also work in Leyland (4.4 miles), Darwen (7 miles), Wigan (7.4 miles) and Westhoughton (7.9 miles), measured as the crow flies. It sits roughly 9 miles from Preston as the crow flies.
Local details
- Area
- Lancashire, England
- Highway authority
- Lancashire County Council (local roads)
- Planning authority
- the council for Chorley
- Postcodes
- PR6 and PR7
- Guide price
- Typically £195–£875 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Leyland (4.4 mi), Darwen (7 mi), Wigan (7.4 mi), Westhoughton (7.9 mi)
Chorley: typical steel security bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£475 + VAT · £225–£565 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £395–£685 + VAT · £465–£815 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£875 + VAT · £725–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Where steel security bollards go in around Chorley
Typical reasons Chorley sites choose steel security bollards:
- Forecourts and building entrances needing a visible boundary
- Stopping cut-through traffic on private roads and estates
- Lines between pedestrian routes and service yards
Consents, ground and services in Chorley
The highway authority for local roads in Chorley is Lancashire County Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Chorley need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Chorley before posts go in.
Base plates must sit on a slab thick and sound enough to hold resin anchors; cracked or thin concrete will let the anchors pull out on the first knock. Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging.
- Check whether the land is public highway or adopted verge before installing; the highway authority's agreement is usually needed.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
Installation, step by step
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Options to consider
| Option | Detail |
|---|---|
| Concrete infill | Adds mass and stiffness and makes the post harder to cut or dent. Usually specified for security and impact positions. |
| Finishes | Hot-dip galvanised, then powder-coated in a RAL colour if wanted. Black, grey, yellow and green are common. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
What affects the quote
When we price steel security bollards in Chorley, these make the biggest difference:
- Surface reinstatement such as block paving or tarmac
- Ground conditions and buried services
- Root-fixed or base-plated installation
Looking after them
A post that leans after a knock usually means the foundation has moved or cracked; it should be re-bedded or replaced rather than left as a trip or snag hazard. Galvanised steel posts need little attention for years at a time.
If posts in Chorley are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install steel security bollards in Chorley?
We cover all of Chorley (PR6 and PR7) and the rest of Lancashire. We also work in Leyland, Darwen and Wigan.
Who gives permission for bollards on the pavement in Chorley?
The highway authority for local roads in Chorley is Lancashire County Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for steel security bollards in Chorley?
In Chorley, typically £195–£875 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £575 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Will galvanised posts rust?
Hot-dip galvanising protects steel for a long time in normal outdoor conditions. Powder coat over the galvanising adds colour and extra protection. Touch up chips promptly in coastal or heavily salted locations.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.