Leicestershire · England
Bollard removal in Oadby
Local installation of bollard removal jobs in Oadby — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout bollard removal jobs in Oadby
Across Oadby, typical sites for bollard removal jobs include schools, residential driveways and high street shopfronts. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
Coverage in Oadby takes in the LE18 postcode district. Nearby, we also work in Wigston (1.8 miles), Leicester (3 miles), Market Harborough (11.2 miles) and Loughborough (12.1 miles), measured as the crow flies. It sits roughly 3 miles from Leicester as the crow flies.
Oadby at a glance
- Area
- Leicestershire, England
- Highway authority
- Leicestershire County Council (local roads)
- Planning authority
- the council for Oadby and Wigston
- Postcodes
- LE18
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
- Nearby
- Wigston (1.8 mi), Leicester (3 mi), Market Harborough (11.2 mi), Loughborough (12.1 mi)
What bollard removal jobs cost in Oadby
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£335 + VAT · £275–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -2% for East Midlands. Guide only — the fixed price follows a survey.
Typical bollard removal jobs requests in Oadby
What bollard removal jobs usually sort out in Oadby:
- Taking out broken stubs and empty sockets
- Clearing old bollards before resurfacing
- Moving bollards to new positions on the same site
What we check first in Oadby
Leicestershire County Council is the highway authority covering Oadby's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Oadby and Wigston) first — we flag this at survey.
Foundations are rarely the size anyone expects. Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
From survey to handover
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Finishes and options
| Option | Detail |
|---|---|
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
What affects the quote
Two Oadby jobs with the same number of posts can price quite differently. The usual reasons:
- Cutting off or full foundation extraction
- Surface type and reinstatement
- Electrical isolation and hydraulic drain-down
Looking after them
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out.
For damaged or loose posts in Oadby, repairs and replacements are priced in writing first.
Questions about bollard removal jobs in Oadby
Can you carry out bollard removal jobs anywhere in Oadby?
We cover all of Oadby (LE18) and the rest of Leicestershire. We also work in Wigston, Leicester and Market Harborough.
Do I need consent for bollards on a public footway in Oadby?
The highway authority for local roads in Oadby is Leicestershire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for bollard removal jobs in Oadby?
In Oadby, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Bollard removal in nearby towns
- Wigston (1.8 mi)
- Leicester (3 mi)
- Market Harborough (11.2 mi)
- Loughborough (12.1 mi)
- Hinckley (13.1 mi)
- Melton Mowbray (13.8 mi)