Somerset · England
Bollard removal in Bridgwater
Bollard removal jobs supplied and fitted in Bridgwater, Somerset: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout bollard removal jobs in Bridgwater
Whether it's residential driveways, community buildings and community car parks, bollard removal jobs in Bridgwater are planned around who needs to get through and who doesn't. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We work across TA6, TA7 and TA5 — Bridgwater itself and places including North Petherton, Wembdon, Pawlett and Dunball. Jobs in Bridgwater can be combined with work in Burnham-on-Sea (7.6 miles), Taunton (8.9 miles), Weston-super-Mare (15.1 miles) and Yeovil (20.7 miles) (straight-line distances). Bridgwater is about 29 miles from Bristol.
Bridgwater at a glance
- Area
- Somerset, England
- Highway authority
- Somerset Council (local roads)
- Planning authority
- Somerset Council
- Postcodes
- TA6, TA7 and TA5
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
- Nearby
- Burnham-on-Sea (7.6 mi), Taunton (8.9 mi), Weston-super-Mare (15.1 mi), Yeovil (20.7 mi)
Common reasons for bollard removal jobs in Bridgwater
What bollard removal jobs usually sort out in Bridgwater:
- Car park and forecourt redesigns
- Moving bollards to new positions on the same site
- Decommissioning automatic bollards that are no longer used
Bridgwater: typical bollard removal prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Bridgwater
In Bridgwater, work on adopted pavements and verges needs consent from Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Somerset Council) first — we flag this at survey.
Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface. Foundations are rarely the size anyone expects.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
How the job runs
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Choosing the right spec
| Option | Detail |
|---|---|
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
What moves the price in Bridgwater
Two Bridgwater jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and reinstatement
- Size of foundations and amount of spoil
- Access, working hours and waste disposal
After installation
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected.
For damaged or loose posts in Bridgwater, repairs and replacements are priced in writing first.
Common questions
Which parts of Bridgwater do you cover for bollard removal jobs?
We cover all of Bridgwater (TA6, TA7 and TA5) and the rest of Somerset. We also work in Burnham-on-Sea, Taunton and Weston-super-Mare.
Who gives permission for bollards on the pavement in Bridgwater?
In Bridgwater, work on adopted pavements and verges needs consent from Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do bollard removal jobs cost in Bridgwater?
In Bridgwater, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.