Somerset · England
Bollard removal in Frome
Bollard removal jobs supplied and fitted in Frome, Somerset: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageFrome bollard removal jobs
From community buildings, local parades and small industrial units, Frome has plenty of places where bollard removal jobs earn their keep. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
Coverage in Frome takes in the BA11 postcode district and nearby places like Beckington, Nunney, Rode and Mells. We also cover neighbouring Trowbridge (8 miles), Bath (10.3 miles), Kingswood (17.5 miles) and Chippenham (18.1 miles) — distances are straight-line. Bristol is around 20 miles away.
Frome at a glance
- Area
- Somerset, England
- Highway authority
- Somerset Council (local roads)
- Planning authority
- Somerset Council
- Postcodes
- BA11
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
- Nearby
- Trowbridge (8 mi), Bath (10.3 mi), Kingswood (17.5 mi), Chippenham (18.1 mi)
Typical bollard removal jobs requests in Frome
What bollard removal jobs usually sort out in Frome:
- Car park and forecourt redesigns
- Clearing old bollards before resurfacing
- Removing redundant lighting bollards
What bollard removal jobs cost in Frome
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Frome
Somerset Council is the highway authority covering Frome's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Frome need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Somerset Council before posts go in.
Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
From survey to handover
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Specification choices
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
What affects the quote
Two Frome jobs with the same number of posts can price quite differently. The usual reasons:
- Cutting off or full foundation extraction
- Access, working hours and waste disposal
- Size of foundations and amount of spoil
Looking after them
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out.
We can also service, repair or replace existing posts anywhere in Frome.
Bollard removal in Frome: FAQs
Can you carry out bollard removal jobs anywhere in Frome?
We cover all of Frome (BA11) and the rest of Somerset. We also work in Trowbridge, Bath and Kingswood.
Who gives permission for bollards on the pavement in Frome?
The highway authority for local roads in Frome is Somerset Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do bollard removal jobs cost in Frome?
In Frome, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Bollard removal near Frome
- Trowbridge (8 mi)
- Bath (10.3 mi)
- Kingswood (17.5 mi)
- Chippenham (18.1 mi)
- Mangotsfield (19.6 mi)
- Bristol (19.7 mi)