Tyne and Wear · England
Bollard removal in Hebburn
Bollard removal jobs for sites across Hebburn and the rest of Tyne and Wear, from the first measurement to the last relaid paving block.
Computer-generated imageHebburn bollard removal jobs
Bollard removal jobs suit plenty of Hebburn sites, community car parks, local parades and residential driveways among them. Posts can be cut off at or below ground level or fully extracted with their concrete.
Coverage in Hebburn takes in the NE31 postcode district. Nearby, we also work in Jarrow (1.3 miles), Wallsend (1.4 miles), Felling (2.6 miles) and Gateshead (3.5 miles), measured as the crow flies. It sits roughly 4 miles from Newcastle upon Tyne as the crow flies.
Local details
- Area
- Tyne and Wear, England
- Highway authority
- South Tyneside Council (local roads)
- Planning authority
- South Tyneside Council
- Postcodes
- NE31
- Guide price
- Typically £75–£335 per post + VAT (£90–£395 inc VAT for homes); minimum job £275
- Survey
- Free, with a fixed written quote
Hebburn: typical bollard removal prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £75–£185 + VAT · £90–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £145–£255 + VAT · £165–£305 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £225–£335 + VAT · £265–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -4% for North East. Guide only — the fixed price follows a survey.
Typical bollard removal jobs requests in Hebburn
Why sites in Hebburn book bollard removal jobs:
- Access routes no longer needing control
- Taking out broken stubs and empty sockets
- Decommissioning automatic bollards that are no longer used
Consents, ground and services in Hebburn
In Hebburn, work on adopted pavements and verges needs consent from South Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Hebburn need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at South Tyneside Council before posts go in.
Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first. Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Choosing the right spec
| Option | Detail |
|---|---|
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
What affects the quote
When we price bollard removal jobs in Hebburn, these make the biggest difference:
- Surface type and reinstatement
- Access, working hours and waste disposal
- Number and type of bollards
After installation
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected.
For damaged or loose posts in Hebburn, repairs and replacements are priced in writing first.
Common questions
Which parts of Hebburn do you cover for bollard removal jobs?
We cover all of Hebburn (NE31) and the rest of Tyne and Wear. We also work in Jarrow, Wallsend and Felling.
Do I need consent for bollards on a public footway in Hebburn?
The highway authority for local roads in Hebburn is South Tyneside Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do bollard removal jobs cost in Hebburn?
In Hebburn, typically £75–£335 per post removed with footing, surface made good, plus VAT (£90–£395 including VAT for homeowners), with a minimum job of £275 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Can removed bollards be reused elsewhere on site?
Often, if they come out undamaged. Steel posts and removable bollards relocate well. New foundations are formed at the new positions.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Bollard removal in nearby towns
- Jarrow (1.3 mi)
- Wallsend (1.4 mi)
- Felling (2.6 mi)
- Gateshead (3.5 mi)
- South Shields (3.7 mi)
- Newcastle upon Tyne (3.9 mi)