Tyne and Wear · England
Bollard removal in Wallsend
Planning bollard removal jobs in Wallsend? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBollard removal in Wallsend
From local parades, small industrial units and schools, Wallsend has plenty of places where bollard removal jobs earn their keep. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We work across NE28 and NE12 — Wallsend itself and places including Longbenton and Killingworth. Jobs in Wallsend can be combined with work in Hebburn (1.4 miles), Jarrow (2.1 miles), Felling (3 miles) and Gateshead (3.4 miles) (straight-line distances). Newcastle upon Tyne is around 3 miles away.
Wallsend at a glance
- Area
- Tyne and Wear, England
- Highway authority
- North Tyneside Council (local roads)
- Planning authority
- North Tyneside Council
- Postcodes
- NE28 and NE12
- Guide price
- Typically £75–£335 per post + VAT (£90–£395 inc VAT for homes); minimum job £275
- Survey
- Free, with a fixed written quote
Typical bollard removal jobs requests in Wallsend
Why sites in Wallsend book bollard removal jobs:
- Moving bollards to new positions on the same site
- Decommissioning automatic bollards that are no longer used
- Car park and forecourt redesigns
Guide prices for Wallsend
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £75–£185 + VAT · £90–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £145–£255 + VAT · £165–£305 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £225–£335 + VAT · £265–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -4% for North East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Wallsend
In Wallsend, work on adopted pavements and verges needs consent from North Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Tyneside Council) first — we flag this at survey.
Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal. Foundations are rarely the size anyone expects.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
Installation, step by step
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Finishes and options
| Option | Detail |
|---|---|
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
What affects the quote
When we price bollard removal jobs in Wallsend, these make the biggest difference:
- Access, working hours and waste disposal
- Number and type of bollards
- Surface type and reinstatement
After installation
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out.
For damaged or loose posts in Wallsend, repairs and replacements are priced in writing first.
Common questions
Can you carry out bollard removal jobs anywhere in Wallsend?
We cover all of Wallsend (NE28 and NE12) and the rest of Tyne and Wear. We also work in Hebburn, Jarrow and Felling.
Do I need consent for bollards on a public footway in Wallsend?
In Wallsend, work on adopted pavements and verges needs consent from North Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for bollard removal jobs in Wallsend?
In Wallsend, typically £75–£335 per post removed with footing, surface made good, plus VAT (£90–£395 including VAT for homeowners), with a minimum job of £275 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Can removed bollards be reused elsewhere on site?
Often, if they come out undamaged. Steel posts and removable bollards relocate well. New foundations are formed at the new positions.
Bollard removal in nearby towns
- Hebburn (1.4 mi)
- Jarrow (2.1 mi)
- Felling (3 mi)
- Gateshead (3.4 mi)
- Newcastle upon Tyne (3.4 mi)
- North Shields (3.8 mi)