Bollard Installers

London · England

Bollard repairs in Richmond upon Thames

Local bollard repairs across Richmond upon Thames — we diagnose, explain and price in writing before doing more.

Installer in hi-vis kneeling to re-bed a leaning black bollard on a footway, with cones, mortar bucket and spirit levelComputer-generated image

Bollard repairs in Richmond upon Thames

We carry out bollard repairs throughout Richmond upon Thames, typically for mews courtyards, office entrances and station forecourts. Paid repair visits for loose, leaning and damaged bollards: re-bedding, re-fixing, new sockets, locks, caps and reflective bands.

We work across TW9, TW10, TW1, SW14, TW11 and TW2 — Richmond upon Thames itself and places including Twickenham, Teddington, Barnes and Hampton. Nearby, we also work in Wandsworth (3.9 miles), Kingston upon Thames (4.1 miles), Hounslow (4.2 miles) and Hammersmith and Fulham (4.7 miles), measured as the crow flies.

Richmond upon Thames at a glance

Area
London, England
Highway authority
Richmond upon Thames Council (local roads)
Planning authority
Richmond upon Thames Council
Postcodes
TW9, TW10, TW1, SW14, TW11, TW2, SW13 and TW12
Guide price
Typically £135–£515 per visit + VAT (£155–£615 inc VAT for homes)
Survey
Paid visit, price confirmed in writing first
Nearby
Wandsworth (3.9 mi), Kingston upon Thames (4.1 mi), Hounslow (4.2 mi), Hammersmith and Fulham (4.7 mi)

Richmond upon Thames: typical bollard repair prices

SpecificationGuide priceIncludes
Standard£135–£295 + VAT · £155–£345 inc VATStraighten or re-bed one post
Upgraded£245–£405 + VAT · £285–£485 inc VATSeveral posts, or new socket, lock or band
Premium£365–£515 + VAT · £435–£615 inc VATLarger repair with new foundation

Per visit, typically one to three posts; +15% for London. Guide only — the visit price is confirmed in writing first.

Common reasons for bollard repairs in Richmond upon Thames

What bollard repairs usually sort out in Richmond upon Thames:

  • Posts leaning or rocking after a vehicle knock
  • Removable bollards with seized locks or damaged sockets
  • Base-plated bollards with loose or sheared anchors

Before we dig in Richmond upon Thames

The highway authority for local roads in Richmond upon Thames is Richmond upon Thames Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Richmond upon Thames Council) first — we flag this at survey.

Many repairs are really foundation repairs. Re-bedding a post means breaking out old concrete, which may be larger or deeper than expected, and checking for services before digging further.

  • Do not repair crash-rated bollards in ways that change the tested product; involve the manufacturer.
  • On heritage bollards in conservation areas, repair and reset rather than replace where the conservation officer expects it.

From survey to handover

Send photos and details

Tell us what has happened and send photographs of each affected post, close up and from a distance, with the location. That lets us identify the bollard type and the likely repair.

Make safe if needed

Where a post is a hazard now, the first step can be to make it safe by removing or capping it, priced separately in writing so you can approve it on its own.

Record and hand back

The repaired posts are checked, the surface is made good and photographs are sent so you have a record for your maintenance file.

Choosing the right spec

OptionDetail
Cassette clearingEmptying silt and water from telescopic and semi-automatic cassettes and clearing their drainage.
Re-fixing base platesNew resin anchors in fresh positions, a larger plate to spread the load, or a slab repair before re-fixing.
Re-beddingBreaking out a failed foundation and resetting the existing post plumb in new concrete, then reinstating the surface.

What affects the quote

Two Richmond upon Thames jobs with the same number of posts can price quite differently. The usual reasons:

  • Whether foundations or slabs need breaking out
  • Type of repair and number of posts
  • Access, traffic management and working hours

Looking after them

Lubricating locks a few times a year, lifting removable and telescopic posts periodically, keeping cassettes clear of grit, touching up chipped paint and checking for lean after knocks will prevent many of them. Most repair call-outs come from small problems left too long.

If posts in Richmond upon Thames are later hit or damaged, we can repair or replace them — see bollard repairs.

Questions about bollard repairs in Richmond upon Thames

Do you carry out bollard repairs in Richmond upon Thames?

We cover all of Richmond upon Thames (TW9, TW10, TW1, SW14, TW11 and TW2) and the rest of London. We also work in Wandsworth, Kingston upon Thames and Hounslow.

Do I need consent for bollards on a public footway in Richmond upon Thames?

The highway authority for local roads in Richmond upon Thames is Richmond upon Thames Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

What's a typical price for bollard repairs in Richmond upon Thames?

In Richmond upon Thames, typically £135–£515 per visit, typically one to three posts, plus VAT (£155–£615 including VAT for homeowners), using our London guide prices. We confirm the visit price in writing before attending.

What happens if the crew finds more damage than expected?

They stop and tell you, and we price the extra work in writing. You decide whether to go ahead. Nothing beyond the agreed price is carried out without your approval.

Can a bent bollard be straightened?

Only if the bend is slight and the steel has not creased or torn. A sharply bent post is weakened and should be replaced. Often the post is fine and it is the foundation that has moved, which re-bedding fixes.

Bollard repairs near Richmond upon Thames

More from us in Richmond upon Thames

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote