London · England
Shallow-mount security bollard installation in Richmond upon Thames
Local installation of shallow-mount bollards in Richmond upon Thames — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageRichmond upon Thames shallow-mount bollards
We supply and fit shallow-mount bollards throughout Richmond upon Thames, typically for sites such as hospital approaches, estate car parks and office entrances. Like any rated product, its performance applies only to the configuration and foundation that were tested.
We cover Richmond upon Thames's TW9, TW10, TW1, SW14, TW11 and TW2 postcode districts, including places such as Twickenham, Teddington, Barnes and Hampton. Nearby, we also work in Wandsworth (3.9 miles), Kingston upon Thames (4.1 miles), Hounslow (4.2 miles) and Hammersmith and Fulham (4.7 miles), measured as the crow flies.
Local details
- Area
- London, England
- Highway authority
- Richmond upon Thames Council (local roads)
- Planning authority
- Richmond upon Thames Council
- Postcodes
- TW9, TW10, TW1, SW14, TW11, TW2, SW13 and TW12
- Guide price
- Typically £2,295–£10,395 per bollard + VAT; minimum job £5,745
- Survey
- Free, with a fixed written quote
- Nearby
- Wandsworth (3.9 mi), Kingston upon Thames (4.1 mi), Hounslow (4.2 mi), Hammersmith and Fulham (4.7 mi)
What Richmond upon Thames sites use shallow-mount bollards for
Typical reasons Richmond upon Thames sites choose shallow-mount bollards:
- Retrofits outside occupied buildings with tight programmes
- Lines that must cross over shallow drainage or ducts
- Sites where service diversions would be slow or impractical
Guide prices for Richmond upon Thames
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,295–£5,695 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,695–£8,095 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £7,145–£10,395 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Permissions and groundwork in Richmond upon Thames
The highway authority for local roads in Richmond upon Thames is Richmond upon Thames Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Richmond upon Thames is listed or inside a conservation area, check with the local planning authority (Richmond upon Thames Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Agree works and separation distances with utility owners, and with the highway authority where the line is on public highway.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
From survey to handover
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Options to consider
| Option | Detail |
|---|---|
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
Pricing shallow-mount bollards in Richmond upon Thames
Our London guide prices are a starting point; the survey in Richmond upon Thames firms them up. What tends to move them:
- Length of run and the system needed to achieve the rating
- Restricted working hours in busy streets or occupied sites
- Structural engineering checks on slabs or decks
Keeping them working
Any later utility work beside the line should be supervised so the frame is not undermined. Pay attention to the surface around the posts, because settlement or loose paving can indicate movement in the bearing layer.
For damaged or loose posts in Richmond upon Thames, repairs and replacements are priced in writing first.
Common questions
Do you install shallow-mount bollards in Richmond upon Thames?
We cover all of Richmond upon Thames (TW9, TW10, TW1, SW14, TW11 and TW2) and the rest of London. We also work in Wandsworth, Kingston upon Thames and Hounslow.
Do I need consent for shallow-mount bollards on a public footway in Richmond upon Thames?
The highway authority for local roads in Richmond upon Thames is Richmond upon Thames Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for shallow-mount bollards in Richmond upon Thames?
In Richmond upon Thames, typically £2,295–£10,395 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,745 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.
Shallow-mount bollards near Richmond upon Thames
- Wandsworth (3.9 mi)
- Kingston upon Thames (4.1 mi)
- Hounslow (4.2 mi)
- Hammersmith and Fulham (4.7 mi)
- Merton (4.8 mi)
- Kensington and Chelsea (5.7 mi)