London · England
Ram-raid protection bollards in Richmond upon Thames
Ram-raid bollards supplied and fitted in Richmond upon Thames, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRam-raid bollards in Richmond upon Thames
We supply and fit ram-raid bollards throughout Richmond upon Thames, typically for sites such as station forecourts, places of worship and hospital approaches. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across TW9, TW10, TW1, SW14, TW11 and TW2 — Richmond upon Thames itself and places including Twickenham, Teddington, Barnes and Hampton. Nearby, we also work in Wandsworth (3.9 miles), Kingston upon Thames (4.1 miles), Hounslow (4.2 miles) and Hammersmith and Fulham (4.7 miles), measured as the crow flies.
Richmond upon Thames at a glance
- Area
- London, England
- Highway authority
- Richmond upon Thames Council (local roads)
- Planning authority
- Richmond upon Thames Council
- Postcodes
- TW9, TW10, TW1, SW14, TW11, TW2, SW13 and TW12
- Guide price
- Typically £455–£1,695 per bollard + VAT; minimum job £1,095
- Survey
- Free, with a fixed written quote
- Nearby
- Wandsworth (3.9 mi), Kingston upon Thames (4.1 mi), Hounslow (4.2 mi), Hammersmith and Fulham (4.7 mi)
Typical ram-raid bollards jobs in Richmond upon Thames
Around Richmond upon Thames, ram-raid bollards usually solve one of these:
- Convenience stores and off-licences with glazed frontages
- Filling station kiosks and forecourt shops
- Through-the-wall and freestanding ATMs
Ram-raid bollard prices in Richmond upon Thames
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £455–£985 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £835–£1,345 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,195–£1,695 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Permissions and groundwork in Richmond upon Thames
The highway authority for local roads in Richmond upon Thames is Richmond upon Thames Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Richmond upon Thames Council) first — we flag this at survey.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
What happens on site
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Specification choices
| Option | Detail |
|---|---|
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
What moves the price in Richmond upon Thames
When we price ram-raid bollards in Richmond upon Thames, these make the biggest difference:
- Removable positions and their locks
- Out-of-hours working to avoid closing the shop
- Unrated, PAS 170-1 or crash-rated product
Looking after them
Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight. Ram-raid bollards are robust but not maintenance-free.
We can also service, repair or replace existing posts anywhere in Richmond upon Thames.
Common questions
Which parts of Richmond upon Thames do you cover for ram-raid bollards?
We cover all of Richmond upon Thames (TW9, TW10, TW1, SW14, TW11 and TW2) and the rest of London. We also work in Wandsworth, Kingston upon Thames and Hounslow.
Do I need consent for ram-raid bollards on a public footway in Richmond upon Thames?
Richmond upon Thames Council is the highway authority covering Richmond upon Thames's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for ram-raid bollards in Richmond upon Thames?
In Richmond upon Thames, typically £455–£1,695 per bollard, supplied and installed, plus VAT, with a minimum job of £1,095 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.
Ram-raid bollards in nearby towns
- Wandsworth (3.9 mi)
- Kingston upon Thames (4.1 mi)
- Hounslow (4.2 mi)
- Hammersmith and Fulham (4.7 mi)
- Merton (4.8 mi)
- Kensington and Chelsea (5.7 mi)