City of Edinburgh · Scotland
Bollard replacement in Edinburgh
Planning replacement bollards in Edinburgh? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout replacement bollards in Edinburgh
Across Edinburgh, typical sites for replacement bollards include stadium approaches, pedestrianised streets and university campuses. Replacement is the right answer when a post is too damaged to repair or no longer suits how the site is used.
We cover the EH1, EH2, EH3, EH8, EH7 and EH9 postcode districts in Edinburgh. Nearby, we also work in Musselburgh (5.7 miles), Dalkeith (6.4 miles), Bonnyrigg (6.5 miles) and South Queensferry (8.3 miles), measured as the crow flies.
Local details
- Area
- City of Edinburgh, Scotland
- Roads authority
- City of Edinburgh Council (local roads)
- Planning authority
- City of Edinburgh Council
- Postcodes
- EH1, EH2, EH3, EH8, EH7, EH9, EH6 and EH5
- Guide price
- Typically £215–£1,195 per post + VAT (£255–£1,445 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Musselburgh (5.7 mi), Dalkeith (6.4 mi), Bonnyrigg (6.5 mi), South Queensferry (8.3 mi)
Replacement bollard prices in Edinburgh
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £215–£625 + VAT · £255–£745 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £505–£925 + VAT · £605–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £805–£1,195 + VAT · £965–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical replacement bollards requests in Edinburgh
Why sites in Edinburgh book replacement bollards:
- Posts bent, sheared or broken by vehicle impacts
- Replacing mixed, mismatched posts with a consistent line
- Crushed sockets and failed telescopic cassettes
Before we dig in Edinburgh
In Scotland the council is the roads authority for local roads, which in Edinburgh means City of Edinburgh Council. Bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Edinburgh is listed or inside a conservation area, check with the local planning authority (City of Edinburgh Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Breaking out is done carefully near services, particularly where cables have been laid close to posts since the original installation. Reinstatement matches the surrounding surface, though weathered paving and older tarmac may leave a visible patch.
- Where bollards were required by a planning condition, a security plan or a lease, check that any change of type still meets that requirement.
- Keep gaps and visibility bands in line with Inclusive Mobility guidance when replacing posts on pedestrian routes.
From survey to handover
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Order the replacement
Matching posts, sockets or castings are ordered, and you see details of any close equivalent before it is confirmed.
Install the new post
The new bollard is set in a fresh foundation, aligned with its neighbours and the surface is reinstated to match.
Specification choices
| Option | Detail |
|---|---|
| Heavier section | Larger diameter, thicker wall or concrete-filled steel where posts keep getting bent. |
| Change of type | Swapping fixed posts for removable, telescopic, flexible or polymer bollards to suit how the site is used. |
| Crash-rated upgrade | Replacing unrated posts with tested products, installed to the manufacturer's foundation design and specified with your security adviser. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Edinburgh firms them up. What tends to move them:
- Surface type and reinstatement
- Upgrades that need larger foundations
- Number of posts and the product chosen
Looking after them
Treat new posts as part of your routine inspections: check for lean, chips and faded bands. A single impact on a rarely struck post is bad luck; repeated strikes in the same spot point to a layout problem, such as a tight turn or a missing wheel stop, that a stronger bollard alone will not solve.
For damaged or loose posts in Edinburgh, repairs and replacements are priced in writing first.
Common questions
Can you carry out replacement bollards anywhere in Edinburgh?
We cover all of Edinburgh (EH1, EH2, EH3, EH8, EH7 and EH9) and the rest of City of Edinburgh. We also work in Musselburgh, Dalkeith and Bonnyrigg.
Do I need consent for bollards on a public footway in Edinburgh?
For anything on the public footway in Edinburgh we check with the roads authority first — City of Edinburgh Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for replacement bollards in Edinburgh?
In Edinburgh, typically £215–£1,195 per post replaced, old post and footing removed, plus VAT (£255–£1,445 including VAT for homeowners), with a minimum job of £445 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a new bollard reuse the old foundation?
Sometimes, if the old foundation is sound and suits the new post. Foundations cracked by an impact are broken out. Rated bollards always need the manufacturer's tested foundation.
Should we replace like-for-like or upgrade?
Like-for-like if the post was hit once in an unusual incident. Consider an upgrade if the same position is struck repeatedly or the post no longer suits how the site is used. The survey will show which makes sense.
Bollard replacement in nearby towns
- Musselburgh (5.7 mi)
- Dalkeith (6.4 mi)
- Bonnyrigg (6.5 mi)
- South Queensferry (8.3 mi)
- Penicuik (8.4 mi)
- Tranent (9.4 mi)