City of Edinburgh · Scotland
Lighting bollard installation in Edinburgh
Local installation of lighting bollards in Edinburgh — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout lighting bollards in Edinburgh
Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician. In Edinburgh, that tends to mean sites such as distribution parks, office forecourts and university campuses.
Coverage in Edinburgh takes in the EH1, EH2, EH3, EH8, EH7 and EH9 postcode districts. Nearby, we also work in Musselburgh (5.7 miles), Dalkeith (6.4 miles), Bonnyrigg (6.5 miles) and South Queensferry (8.3 miles), measured as the crow flies.
Key facts for this area
- Area
- City of Edinburgh, Scotland
- Roads authority
- City of Edinburgh Council (local roads)
- Planning authority
- City of Edinburgh Council
- Postcodes
- EH1, EH2, EH3, EH8, EH7, EH9, EH6 and EH5
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £845
- Survey
- Free, with a fixed written quote
- Nearby
- Musselburgh (5.7 mi), Dalkeith (6.4 mi), Bonnyrigg (6.5 mi), South Queensferry (8.3 mi)
Lighting bollards in Edinburgh: common uses
Typical reasons Edinburgh sites choose lighting bollards:
- Parks and areas where tall columns would be intrusive
- Private gardens and long driveways
- Car park walkways and pedestrian crossings
Edinburgh: typical lighting bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Edinburgh
In Scotland the council is the roads authority for local roads, which in Edinburgh means City of Edinburgh Council. Lighting bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at City of Edinburgh Council can confirm before anything is ordered.
Bases are set in firm ground with the cable entry facing the right way, and on paved routes the bollards are positioned so cables can be pulled through ducts rather than requiring surfaces to be lifted again later. Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
From survey to handover
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Electrical connection
A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Options to consider
| Option | Detail |
|---|---|
| Mains LED bollards | Wired from a dedicated circuit for reliable lighting of paths and car parks. Needs cable routes and electrical certification. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
| Controls | Photocells, timers, motion sensors and dimming to light only when and as much as needed. |
What affects the quote
When we price lighting bollards in Edinburgh, these make the biggest difference:
- Distance from the supply and circuit requirements
- Controls such as photocells, timers or sensors
- Mains or solar bollards
Keeping them working
LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free. Photocells and timers need resetting when the clocks change unless they adjust automatically.
If posts in Edinburgh are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install lighting bollards in Edinburgh?
We cover all of Edinburgh (EH1, EH2, EH3, EH8, EH7 and EH9) and the rest of City of Edinburgh. We also work in Musselburgh, Dalkeith and Bonnyrigg.
Do I need consent for lighting bollards on a public footway in Edinburgh?
Edinburgh falls under City of Edinburgh Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for lighting bollards in Edinburgh?
In Edinburgh, typically £345–£1,195 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £845 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Are solar bollard lights worth it?
For marking edges and low-use paths, they can be, because there is no cabling to install. They give less light than mains bollards and perform poorly in shaded spots and short winter days. For lighting a route properly, mains bollards are more dependable.
Lighting bollards near Edinburgh
- Musselburgh (5.7 mi)
- Dalkeith (6.4 mi)
- Bonnyrigg (6.5 mi)
- South Queensferry (8.3 mi)
- Penicuik (8.4 mi)
- Tranent (9.4 mi)