City of Edinburgh · Scotland
Telescopic bollard installation in Edinburgh
Planning telescopic bollards in Edinburgh? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageEdinburgh telescopic bollards
Whether it's university campuses, multi-storey car parks and retail parks, telescopic bollards in Edinburgh are planned around who needs to get through and who doesn't. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We cover every part of Edinburgh in the EH1, EH2, EH3, EH8, EH7 and EH9 postcode districts. Nearby, we also work in Musselburgh (5.7 miles), Dalkeith (6.4 miles), Bonnyrigg (6.5 miles) and South Queensferry (8.3 miles), measured as the crow flies.
Edinburgh at a glance
- Area
- City of Edinburgh, Scotland
- Roads authority
- City of Edinburgh Council (local roads)
- Planning authority
- City of Edinburgh Council
- Postcodes
- EH1, EH2, EH3, EH8, EH7, EH9, EH6 and EH5
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Musselburgh (5.7 mi), Dalkeith (6.4 mi), Bonnyrigg (6.5 mi), South Queensferry (8.3 mi)
What Edinburgh sites use telescopic bollards for
Typical reasons Edinburgh sites choose telescopic bollards:
- Shared drives that need occasional closing
- Allocated parking bays in flats and private developments
- Commercial yards where posts must not be left lying around
Edinburgh: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Edinburgh
For anything on the public footway in Edinburgh we check with the roads authority first — City of Edinburgh Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at City of Edinburgh Council can confirm before anything is ordered.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- If the drive is shared, agree positions and keys with the other users first.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
Pricing telescopic bollards in Edinburgh
When we price telescopic bollards in Edinburgh, these make the biggest difference:
- Drainage: simple soakaway or a connection to a drain
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
We can also service, repair or replace existing posts anywhere in Edinburgh.
Telescopic bollards in Edinburgh: FAQs
Do you install telescopic bollards in Edinburgh?
We cover all of Edinburgh (EH1, EH2, EH3, EH8, EH7 and EH9) and the rest of City of Edinburgh. We also work in Musselburgh, Dalkeith and Bonnyrigg.
Who gives permission for bollards on the pavement in Edinburgh?
Edinburgh falls under City of Edinburgh Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for telescopic bollards in Edinburgh?
In Edinburgh, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Telescopic bollards in nearby towns
- Musselburgh (5.7 mi)
- Dalkeith (6.4 mi)
- Bonnyrigg (6.5 mi)
- South Queensferry (8.3 mi)
- Penicuik (8.4 mi)
- Tranent (9.4 mi)