Midlothian · Scotland
Telescopic bollard installation in Penicuik
Telescopic bollards supplied and fitted in Penicuik, Midlothian: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageTelescopic bollards in Penicuik
Because the post stays in its cassette, there is nothing to store and nothing to lose. In Penicuik, that tends to mean sites such as filling-station forecourts, high street shopfronts and community car parks.
We cover Penicuik's EH26 postcode district, including places such as Auchendinny, Silverburn and Howgate. We also cover neighbouring Bonnyrigg (5.5 miles), Dalkeith (7.5 miles), Edinburgh (8.4 miles) and Musselburgh (10.2 miles) — distances are straight-line. Penicuik is about 8 miles from Edinburgh.
Penicuik at a glance
- Area
- Midlothian, Scotland
- Roads authority
- Midlothian Council (local roads)
- Planning authority
- Midlothian Council
- Postcodes
- EH26
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Bonnyrigg (5.5 mi), Dalkeith (7.5 mi), Edinburgh (8.4 mi), Musselburgh (10.2 mi)
Where telescopic bollards go in around Penicuik
Typical reasons Penicuik sites choose telescopic bollards:
- Commercial yards where posts must not be left lying around
- Access roads closed outside working hours
- Car parks where a removable post would go missing
Penicuik: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Penicuik
For anything on the public footway in Penicuik we check with the roads authority first — Midlothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Midlothian Council can confirm before anything is ordered.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Penicuik firms them up. What tends to move them:
- Excavation depth and the presence of services under the drive
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lubricate the lock with a suitable spray, especially before winter.
If posts in Penicuik are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Penicuik do you cover for telescopic bollards?
We cover all of Penicuik (EH26) and the rest of Midlothian. We also work in Bonnyrigg, Dalkeith and Edinburgh.
Do I need consent for telescopic bollards on a public footway in Penicuik?
Penicuik falls under Midlothian Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for telescopic bollards in Penicuik?
In Penicuik, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Telescopic bollards near Penicuik
- Bonnyrigg (5.5 mi)
- Dalkeith (7.5 mi)
- Edinburgh (8.4 mi)
- Musselburgh (10.2 mi)
- Broxburn (11.9 mi)
- Livingston (12.5 mi)