Bollard Installers

West Lothian · Scotland

Telescopic bollard installation in Livingston

Planning telescopic bollards in Livingston? We check ownership, consents and buried services first, then quote a fixed price.

Telescopic security bollard part-lowered into its ground cassette on a block-paved driveway in front of a house garageComputer-generated image

Livingston telescopic bollards

Telescopic bollards suit plenty of Livingston sites, small industrial units, community car parks and filling-station forecourts among them. Because the post stays in its cassette, there is nothing to store and nothing to lose.

Coverage in Livingston takes in the EH54, EH53 and EH55 postcode districts and nearby places like East Calder, Oakbank, Polbeth and West Calder. We also cover neighbouring Broxburn (2.9 miles), Bathgate (4.7 miles), Linlithgow (6 miles) and Whitburn (6.7 miles) — distances are straight-line. Edinburgh is around 13 miles away.

Livingston at a glance

Area
West Lothian, Scotland
Roads authority
West Lothian Council (local roads)
Planning authority
West Lothian Council
Postcodes
EH54, EH53 and EH55
Guide price
Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
Survey
Free, with a fixed written quote
Nearby
Broxburn (2.9 mi), Bathgate (4.7 mi), Linlithgow (6 mi), Whitburn (6.7 mi)

What telescopic bollards cost in Livingston

SpecificationGuide priceIncludes
Standard£345–£705 + VAT · £405–£845 inc VATStandard post, foundation, reinstatement
Upgraded£605–£955 + VAT · £725–£1,145 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£855–£1,195 + VAT · £1,045–£1,445 inc VATHeavy-duty or architectural spec, premium finish

Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.

Where telescopic bollards go in around Livingston

Around Livingston, telescopic bollards usually solve one of these:

  • Sites with no power for automatic bollards
  • Allocated parking bays in flats and private developments
  • Car parks where a removable post would go missing

Consents, ground and services in Livingston

In Scotland the council is the roads authority for local roads, which in Livingston means West Lothian Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.

If your site in Livingston is listed or inside a conservation area, check with the local planning authority (West Lothian Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.

Positions are scanned and hand-dug before committing. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.

  • Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
  • Connect drainage only to surface water systems or a soakaway, never to a foul drain.

What happens on site

Check depth and drainage

The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.

Cut and excavate

The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.

Set the cassette

The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.

Options to consider

OptionDetail
FinishesGalvanised, powder-coated in common colours, or stainless steel to suit the frontage.
Diameter and heightCommonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use.
Lid and head designsFlush hinged lids, removable caps or integrated heads that close the cassette top when lowered.

What affects the quote

Our Scotland guide prices are a starting point; the survey in Livingston firms them up. What tends to move them:

  • Post size and whether lift assistance is wanted
  • Stainless or powder-coated finish
  • Number of posts and keyed-alike locks

After installation

Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.

We can also service, repair or replace existing posts anywhere in Livingston.

Telescopic bollards in Livingston: FAQs

Which parts of Livingston do you cover for telescopic bollards?

We cover all of Livingston (EH54, EH53 and EH55) and the rest of West Lothian. We also work in Broxburn, Bathgate and Linlithgow.

Do I need consent for telescopic bollards on a public footway in Livingston?

For anything on the public footway in Livingston we check with the roads authority first — West Lothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.

What's a typical price for telescopic bollards in Livingston?

In Livingston, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.

Can a telescopic bollard be fitted into a resin or imprinted drive?

Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.

Is a telescopic bollard harder to lift than a removable one?

Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.

Telescopic bollards near Livingston

More from us in Livingston

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote