Midlothian · Scotland
Telescopic bollard installation in Bonnyrigg
Telescopic bollards for sites across Bonnyrigg and the rest of Midlothian, from the first measurement to the last relaid paving block.
Computer-generated imageAbout telescopic bollards in Bonnyrigg
Across Bonnyrigg, typical sites for telescopic bollards include community buildings, schools and community car parks. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Bonnyrigg takes in the EH19, EH18, EH24, EH20, EH25 and EH23 postcode districts and nearby places like Rosewell, Loanhead, Old Pentland and Roslin. Nearby, we also work in Dalkeith (2 miles), Musselburgh (5.2 miles), Penicuik (5.5 miles) and Edinburgh (6.5 miles), measured as the crow flies. Bonnyrigg is about 6 miles from Edinburgh.
Key facts for this area
- Area
- Midlothian, Scotland
- Roads authority
- Midlothian Council (local roads)
- Planning authority
- Midlothian Council
- Postcodes
- EH19, EH18, EH24, EH20, EH25 and EH23
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Dalkeith (2 mi), Musselburgh (5.2 mi), Penicuik (5.5 mi), Edinburgh (6.5 mi)
Typical telescopic bollards jobs in Bonnyrigg
Common uses in a place like Bonnyrigg:
- Domestic driveways where the bollard is used daily
- Shared drives that need occasional closing
- Access roads closed outside working hours
Guide prices for Bonnyrigg
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Bonnyrigg
In Scotland the council is the roads authority for local roads, which in Bonnyrigg means Midlothian Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Bonnyrigg is listed or inside a conservation area, check with the local planning authority (Midlothian Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Positions are scanned and hand-dug before committing. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
What happens on site
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What moves the price in Bonnyrigg
When we price telescopic bollards in Bonnyrigg, these make the biggest difference:
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
- Excavation depth and the presence of services under the drive
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lubricate the lock with a suitable spray, especially before winter.
We can also service, repair or replace existing posts anywhere in Bonnyrigg.
Questions about telescopic bollards in Bonnyrigg
Can you install telescopic bollards anywhere in Bonnyrigg?
We cover all of Bonnyrigg (EH19, EH18, EH24, EH20, EH25 and EH23) and the rest of Midlothian. We also work in Dalkeith, Musselburgh and Penicuik.
Who gives permission for bollards on the pavement in Bonnyrigg?
For anything on the public footway in Bonnyrigg we check with the roads authority first — Midlothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do telescopic bollards cost in Bonnyrigg?
In Bonnyrigg, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Telescopic bollards near Bonnyrigg
- Dalkeith (2 mi)
- Musselburgh (5.2 mi)
- Penicuik (5.5 mi)
- Edinburgh (6.5 mi)
- Tranent (7.6 mi)
- South Queensferry (14 mi)