Hampshire · England
Bollard replacement in Hythe
Replacement bollards for sites across Hythe and the rest of Hampshire, from the first measurement to the last relaid paving block.
Computer-generated imageHythe replacement bollards
Whether it's local parades, community car parks and community buildings, replacement bollards in Hythe are planned around who needs to get through and who doesn't. Like-for-like or upgraded replacement of bollards damaged by vehicles, corrosion or wear, matched to the existing line.
We work across SO45 — Hythe itself and places including Dibden Purlieu, Blackfield, Holbury and Dibden. Nearby, we also work in Southampton (3 miles), Totton (5.6 miles), Eastleigh (7.7 miles) and Fareham (9.7 miles), measured as the crow flies. Southampton is around 3 miles away.
Local details
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for New Forest
- Postcodes
- SO45
- Guide price
- Typically £225–£1,245 per post + VAT (£265–£1,495 inc VAT for homes); minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Southampton (3 mi), Totton (5.6 mi), Eastleigh (7.7 mi), Fareham (9.7 mi)
Typical replacement bollards requests in Hythe
Why sites in Hythe book replacement bollards:
- Single missing posts in an otherwise sound line
- Cracked cast iron or chipped concrete bollards
- Crushed sockets and failed telescopic cassettes
Hythe: typical replacement bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £225–£665 + VAT · £265–£795 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£975 + VAT · £635–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,245 + VAT · £1,045–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Hythe
The highway authority for local roads in Hythe is Hampshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Hythe is listed or inside a conservation area, check with the local planning authority (the council for New Forest) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Breaking out is done carefully near services, particularly where cables have been laid close to posts since the original installation. Where a replacement is being made after an impact, the surrounding paving and kerbs are checked as well, because a vehicle that bent a post has often lifted or cracked the surface beside it, and that damage is included in the quote rather than left for later.
- On public highway, the highway authority may need to approve the replacement or carry out the work itself.
- Keep gaps and visibility bands in line with Inclusive Mobility guidance when replacing posts on pedestrian routes.
Installation, step by step
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Order the replacement
Matching posts, sockets or castings are ordered, and you see details of any close equivalent before it is confirmed.
Install the new post
The new bollard is set in a fresh foundation, aligned with its neighbours and the surface is reinstated to match.
Finishes and options
| Option | Detail |
|---|---|
| Making safe | Removing or capping a dangerous broken stub before the replacement is fitted. |
| Heavier section | Larger diameter, thicker wall or concrete-filled steel where posts keep getting bent. |
| Change of type | Swapping fixed posts for removable, telescopic, flexible or polymer bollards to suit how the site is used. |
What affects the quote
Two Hythe jobs with the same number of posts can price quite differently. The usual reasons:
- Upgrades that need larger foundations
- Number of posts and the product chosen
- Surface type and reinstatement
Keeping them working
Treat new posts as part of your routine inspections: check for lean, chips and faded bands. Keep a record of the new product, finish and supplier so future replacements match.
We can also service, repair or replace existing posts anywhere in Hythe.
Common questions
Do you carry out replacement bollards in Hythe?
We cover all of Hythe (SO45) and the rest of Hampshire. We also work in Southampton, Totton and Eastleigh.
Who gives permission for bollards on the pavement in Hythe?
Hampshire County Council is the highway authority covering Hythe's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for replacement bollards in Hythe?
In Hythe, typically £225–£1,245 per post replaced, old post and footing removed, plus VAT (£265–£1,495 including VAT for homeowners), with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the old bollard?
It is taken away with the broken-out concrete. Steel and iron are recycled where possible. Original heritage bollards can be returned to you if you want to keep them.
Should we replace like-for-like or upgrade?
Like-for-like if the post was hit once in an unusual incident. Consider an upgrade if the same position is struck repeatedly or the post no longer suits how the site is used. The survey will show which makes sense.
Bollard replacement near Hythe
- Southampton (3 mi)
- Totton (5.6 mi)
- Eastleigh (7.7 mi)
- Fareham (9.7 mi)
- Gosport (12.7 mi)
- New Milton (13.6 mi)