Hampshire · England
Concrete bollard installation in Hythe
Local installation of concrete bollards in Hythe — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageHythe concrete bollards
From schools, high street shopfronts and small industrial units, Hythe has plenty of places where concrete bollards earn their keep. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
We cover Hythe's SO45 postcode district, including places such as Dibden Purlieu, Blackfield, Holbury and Dibden. Nearby, we also work in Southampton (3 miles), Totton (5.6 miles), Eastleigh (7.7 miles) and Fareham (9.7 miles), measured as the crow flies. Southampton is around 3 miles away.
Hythe at a glance
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for New Forest
- Postcodes
- SO45
- Guide price
- Typically £185–£635 per bollard + VAT; minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Southampton (3 mi), Totton (5.6 mi), Eastleigh (7.7 mi), Fareham (9.7 mi)
What Hythe sites use concrete bollards for
Common uses in a place like Hythe:
- Edges of open land and verges subject to unauthorised vehicle access
- Town centre squares and pedestrianised streets
- Housing estates and communal areas
Hythe: typical concrete bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£375 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£505 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £455–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Hythe
Hampshire County Council is the highway authority covering Hythe's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Hythe need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for New Forest before posts go in.
Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close. Services under footways are traced before excavation.
- Do not present untested concrete bollards as crash-rated protection.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
How the job runs
Survey and choose
A free site survey looks at the setting, ground, delivery access and where a lifting vehicle can stand. You receive a fixed written quote with the product, finish and fixing.
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Choosing the right spec
| Option | Detail |
|---|---|
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
What affects the quote
Our South East guide prices are a starting point; the survey in Hythe firms them up. What tends to move them:
- Foundation depth and ground conditions
- Size, shape and surface finish
- Reinstatement of paving or turf
After installation
Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
We can also service, repair or replace existing posts anywhere in Hythe.
Concrete bollards in Hythe: FAQs
Do you install concrete bollards in Hythe?
We cover all of Hythe (SO45) and the rest of Hampshire. We also work in Southampton, Totton and Eastleigh.
Do I need consent for concrete bollards on a public footway in Hythe?
The highway authority for local roads in Hythe is Hampshire County Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for concrete bollards in Hythe?
In Hythe, typically £185–£635 per bollard, supplied and installed, plus VAT, with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Can a chipped concrete bollard be repaired?
Small chips and edge damage can be filled with colour-matched mortar. A bollard cracked through or broken at its base needs replacing. Matching finishes is easier if the original product is still made.
Concrete bollards near Hythe
- Southampton (3 mi)
- Totton (5.6 mi)
- Eastleigh (7.7 mi)
- Fareham (9.7 mi)
- Gosport (12.7 mi)
- New Milton (13.6 mi)