Kent · England
Bollard replacement in Whitstable
Replacement bollards supplied and fitted in Whitstable, Kent: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageWhitstable replacement bollards
In the town of Whitstable, replacement bollards tend to go in at filling-station forecourts, small industrial units and local parades. Like-for-like or upgraded replacement of bollards damaged by vehicles, corrosion or wear, matched to the existing line.
We work across CT5 — Whitstable itself and places including Yorkletts and Radfall. Nearby, we also work in Herne Bay (4.5 miles), Canterbury (6.1 miles), Faversham (6.7 miles) and Sittingbourne (12.7 miles), measured as the crow flies.
Key facts for this area
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Canterbury
- Postcodes
- CT5
- Guide price
- Typically £225–£1,245 per post + VAT (£265–£1,495 inc VAT for homes); minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Herne Bay (4.5 mi), Canterbury (6.1 mi), Faversham (6.7 mi), Sittingbourne (12.7 mi)
Typical replacement bollards requests in Whitstable
Why sites in Whitstable book replacement bollards:
- Replacing mixed, mismatched posts with a consistent line
- Crushed sockets and failed telescopic cassettes
- Cracked cast iron or chipped concrete bollards
Whitstable: typical replacement bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £225–£665 + VAT · £265–£795 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£975 + VAT · £635–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,245 + VAT · £1,045–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Whitstable
The highway authority for local roads in Whitstable is Kent County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Whitstable is listed or inside a conservation area, check with the local planning authority (the council for Canterbury) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches the surrounding surface, though weathered paving and older tarmac may leave a visible patch. If the old foundation is cracked from the impact, it is removed entirely; if it is sound and suits the new post, reuse can reduce disruption.
- On public highway, the highway authority may need to approve the replacement or carry out the work itself.
- Keep gaps and visibility bands in line with Inclusive Mobility guidance when replacing posts on pedestrian routes.
From survey to handover
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Install the new post
The new bollard is set in a fresh foundation, aligned with its neighbours and the surface is reinstated to match.
Hand over records
Photographs and an itemised invoice are provided, which is useful when recovering the cost from a driver's insurer.
Choosing the right spec
| Option | Detail |
|---|---|
| Making safe | Removing or capping a dangerous broken stub before the replacement is fitted. |
| Like-for-like | Same diameter, height, finish and fixing, so the line looks unchanged. |
| Change of type | Swapping fixed posts for removable, telescopic, flexible or polymer bollards to suit how the site is used. |
Pricing replacement bollards in Whitstable
Two Whitstable jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and reinstatement
- Matching special finishes, castings or discontinued products
- Size and condition of the old foundation
Keeping them working
A single impact on a rarely struck post is bad luck; repeated strikes in the same spot point to a layout problem, such as a tight turn or a missing wheel stop, that a stronger bollard alone will not solve. Keep a record of the new product, finish and supplier so future replacements match.
If posts in Whitstable are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about replacement bollards in Whitstable
Can you carry out replacement bollards anywhere in Whitstable?
We cover all of Whitstable (CT5) and the rest of Kent. We also work in Herne Bay, Canterbury and Faversham.
Do I need consent for bollards on a public footway in Whitstable?
Kent County Council is the highway authority covering Whitstable's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for replacement bollards in Whitstable?
In Whitstable, typically £225–£1,245 per post replaced, old post and footing removed, plus VAT (£265–£1,495 including VAT for homeowners), with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
A driver hit our bollard and left: what should we do?
Make the area safe, photograph the damage and report it if the post is on public land. Check whether CCTV covered the area. A written quote from us can then support any claim.
Should we replace like-for-like or upgrade?
Like-for-like if the post was hit once in an unusual incident. Consider an upgrade if the same position is struck repeatedly or the post no longer suits how the site is used. The survey will show which makes sense.
Bollard replacement in nearby towns
- Herne Bay (4.5 mi)
- Canterbury (6.1 mi)
- Faversham (6.7 mi)
- Sittingbourne (12.7 mi)
- Margate (15.6 mi)
- Ashford, Kent (16.2 mi)