Kent · England
Bollard replacement in Sittingbourne
Planning replacement bollards in Sittingbourne? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBollard replacement in Sittingbourne
From small industrial units, community car parks and local parades, Sittingbourne has plenty of places where replacement bollards earn their keep. Replacement is the right answer when a post is too damaged to repair or no longer suits how the site is used.
Coverage in Sittingbourne takes in the ME10, ME9 and ME11 postcode districts and nearby places like Iwade, Teynham, Newington and Lower Halstow. Nearby, we also work in Faversham (7 miles), Gillingham (8.6 miles), Chatham (9.2 miles) and Rochester (10.3 miles), measured as the crow flies.
Sittingbourne at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Swale
- Postcodes
- ME10, ME9 and ME11
- Guide price
- Typically £225–£1,245 per post + VAT (£265–£1,495 inc VAT for homes); minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Faversham (7 mi), Gillingham (8.6 mi), Chatham (9.2 mi), Rochester (10.3 mi)
Sittingbourne: typical replacement bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £225–£665 + VAT · £265–£795 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£975 + VAT · £635–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,245 + VAT · £1,045–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; +6% for South East. Guide only — the fixed price follows a survey.
Common reasons for replacement bollards in Sittingbourne
Why sites in Sittingbourne book replacement bollards:
- Upgrading posts that keep being hit
- Single missing posts in an otherwise sound line
- Replacing mixed, mismatched posts with a consistent line
What we check first in Sittingbourne
Kent County Council is the highway authority covering Sittingbourne's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Sittingbourne is listed or inside a conservation area, check with the local planning authority (the council for Swale) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Removing an old bollard often reveals more concrete than expected, because foundations from different eras vary widely in size. Breaking out is done carefully near services, particularly where cables have been laid close to posts since the original installation.
- Upgrades to rated products must use the manufacturer's tested foundation, specified with your security adviser.
- Keep gaps and visibility bands in line with Inclusive Mobility guidance when replacing posts on pedestrian routes.
From survey to handover
Make safe
If a broken post or stub is a hazard, it can be removed or capped first. That is priced separately in writing so you can approve it on its own.
Order the replacement
Matching posts, sockets or castings are ordered, and you see details of any close equivalent before it is confirmed.
Install the new post
The new bollard is set in a fresh foundation, aligned with its neighbours and the surface is reinstated to match.
Specification choices
| Option | Detail |
|---|---|
| Like-for-like | Same diameter, height, finish and fixing, so the line looks unchanged. |
| Change of type | Swapping fixed posts for removable, telescopic, flexible or polymer bollards to suit how the site is used. |
| Crash-rated upgrade | Replacing unrated posts with tested products, installed to the manufacturer's foundation design and specified with your security adviser. |
Pricing replacement bollards in Sittingbourne
When we price replacement bollards in Sittingbourne, these make the biggest difference:
- Matching special finishes, castings or discontinued products
- Surface type and reinstatement
- Making safe before the replacement
After installation
Treat new posts as part of your routine inspections: check for lean, chips and faded bands. After replacement, look at why the post failed.
If posts in Sittingbourne are later hit or damaged, we can repair or replace them — see bollard repairs.
Bollard replacement in Sittingbourne: FAQs
Do you carry out replacement bollards in Sittingbourne?
We cover all of Sittingbourne (ME10, ME9 and ME11) and the rest of Kent. We also work in Faversham, Gillingham and Chatham.
Who gives permission for bollards on the pavement in Sittingbourne?
In Sittingbourne, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for replacement bollards in Sittingbourne?
In Sittingbourne, typically £225–£1,245 per post replaced, old post and footing removed, plus VAT (£265–£1,495 including VAT for homeowners), with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can you provide paperwork for an insurance claim?
Yes. The written quote, photographs and itemised invoice are usually what an insurer asks for when recovering the cost from the driver responsible. We can provide them in the format your insurer needs.
Can you replace just one bollard in a line?
Yes. We measure and match the existing posts so the new one sits in line at the same height and finish. If the original product is no longer made, we show you a close equivalent first.
Bollard replacement near Sittingbourne
- Faversham (7 mi)
- Gillingham (8.6 mi)
- Chatham (9.2 mi)
- Rochester (10.3 mi)
- Maidstone (10.7 mi)
- Strood (11.6 mi)