Kent · England
Ram-raid protection bollards in Sittingbourne
Ram-raid bollards for sites across Sittingbourne and the rest of Kent, from the first measurement to the last relaid paving block.
Computer-generated imageAbout ram-raid bollards in Sittingbourne
Whether it's community car parks, small industrial units and schools, ram-raid bollards in Sittingbourne are planned around who needs to get through and who doesn't. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across ME10, ME9 and ME11 — Sittingbourne itself and places including Iwade, Teynham, Newington and Lower Halstow. We also cover neighbouring Faversham (7 miles), Gillingham (8.6 miles), Chatham (9.2 miles) and Rochester (10.3 miles) — distances are straight-line.
Key facts for this area
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Swale
- Postcodes
- ME10, ME9 and ME11
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
- Nearby
- Faversham (7 mi), Gillingham (8.6 mi), Chatham (9.2 mi), Rochester (10.3 mi)
What ram-raid bollards cost in Sittingbourne
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What Sittingbourne sites use ram-raid bollards for
Common uses in a place like Sittingbourne:
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Warehouses and trade counters with roller-shutter entrances
- Through-the-wall and freestanding ATMs
Permissions and groundwork in Sittingbourne
Kent County Council is the highway authority covering Sittingbourne's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Sittingbourne need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Swale before posts go in.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
Installation, step by step
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Options to consider
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
What moves the price in Sittingbourne
Our South East guide prices are a starting point; the survey in Sittingbourne firms them up. What tends to move them:
- Reinstatement of forecourt or natural stone surfaces
- Removable positions and their locks
- Out-of-hours working to avoid closing the shop
Keeping them working
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
If posts in Sittingbourne are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about ram-raid bollards in Sittingbourne
Do you install ram-raid bollards in Sittingbourne?
We cover all of Sittingbourne (ME10, ME9 and ME11) and the rest of Kent. We also work in Faversham, Gillingham and Chatham.
Who gives permission for bollards on the pavement in Sittingbourne?
The highway authority for local roads in Sittingbourne is Kent County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Sittingbourne?
In Sittingbourne, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Ram-raid bollards near Sittingbourne
- Faversham (7 mi)
- Gillingham (8.6 mi)
- Chatham (9.2 mi)
- Rochester (10.3 mi)
- Maidstone (10.7 mi)
- Strood (11.6 mi)