Somerset · England
Bollard replacement in Frome
Local installation of replacement bollards in Frome — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout replacement bollards in Frome
From local parades, small industrial units and schools, Frome has plenty of places where replacement bollards earn their keep. Like-for-like or upgraded replacement of bollards damaged by vehicles, corrosion or wear, matched to the existing line.
We work across BA11 — Frome itself and places including Beckington, Nunney, Rode and Mells. Jobs in Frome can be combined with work in Trowbridge (8 miles), Bath (10.3 miles), Kingswood (17.5 miles) and Chippenham (18.1 miles) (straight-line distances). Bristol is around 20 miles away.
Key facts for this area
- Area
- Somerset, England
- Highway authority
- Somerset Council (local roads)
- Planning authority
- Somerset Council
- Postcodes
- BA11
- Guide price
- Typically £215–£1,195 per post + VAT (£255–£1,445 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Trowbridge (8 mi), Bath (10.3 mi), Kingswood (17.5 mi), Chippenham (18.1 mi)
Frome: typical replacement bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £215–£625 + VAT · £255–£745 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £505–£925 + VAT · £605–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £805–£1,195 + VAT · £965–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; no regional adjustment. Guide only — the fixed price follows a survey.
Why Frome sites book replacement bollards
Why sites in Frome book replacement bollards:
- Crushed sockets and failed telescopic cassettes
- Replacing mixed, mismatched posts with a consistent line
- Posts bent, sheared or broken by vehicle impacts
Before we dig in Frome
Somerset Council is the highway authority covering Frome's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Frome is listed or inside a conservation area, check with the local planning authority (Somerset Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches the surrounding surface, though weathered paving and older tarmac may leave a visible patch. If the old foundation is cracked from the impact, it is removed entirely; if it is sound and suits the new post, reuse can reduce disruption.
- Upgrades to rated products must use the manufacturer's tested foundation, specified with your security adviser.
- Where bollards were required by a planning condition, a security plan or a lease, check that any change of type still meets that requirement.
How the job runs
Make safe
If a broken post or stub is a hazard, it can be removed or capped first. That is priced separately in writing so you can approve it on its own.
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Hand over records
Photographs and an itemised invoice are provided, which is useful when recovering the cost from a driver's insurer.
Specification choices
| Option | Detail |
|---|---|
| Heavier section | Larger diameter, thicker wall or concrete-filled steel where posts keep getting bent. |
| Making safe | Removing or capping a dangerous broken stub before the replacement is fitted. |
| Like-for-like | Same diameter, height, finish and fixing, so the line looks unchanged. |
What moves the price in Frome
Our South West guide prices are a starting point; the survey in Frome firms them up. What tends to move them:
- Size and condition of the old foundation
- Matching special finishes, castings or discontinued products
- Surface type and reinstatement
Looking after them
After replacement, look at why the post failed. Treat new posts as part of your routine inspections: check for lean, chips and faded bands.
If posts in Frome are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you carry out replacement bollards anywhere in Frome?
We cover all of Frome (BA11) and the rest of Somerset. We also work in Trowbridge, Bath and Kingswood.
Who gives permission for bollards on the pavement in Frome?
The highway authority for local roads in Frome is Somerset Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for replacement bollards in Frome?
In Frome, typically £215–£1,195 per post replaced, old post and footing removed, plus VAT (£255–£1,445 including VAT for homeowners), with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the old bollard?
It is taken away with the broken-out concrete. Steel and iron are recycled where possible. Original heritage bollards can be returned to you if you want to keep them.
A driver hit our bollard and left: what should we do?
Make the area safe, photograph the damage and report it if the post is on public land. Check whether CCTV covered the area. A written quote from us can then support any claim.
Bollard replacement near Frome
- Trowbridge (8 mi)
- Bath (10.3 mi)
- Kingswood (17.5 mi)
- Chippenham (18.1 mi)
- Mangotsfield (19.6 mi)
- Bristol (19.7 mi)