Somerset · England
Timber bollard installation in Frome
Planning timber bollards in Frome? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout timber bollards in Frome
Oak, hardwood and treated softwood bollards for parks, verges, rural sites, car parks and school frontages. In Frome, that tends to mean sites such as community buildings, community car parks and schools.
We work across BA11 — Frome itself and places including Beckington, Nunney, Rode and Mells. Nearby, we also work in Trowbridge (8 miles), Bath (10.3 miles), Kingswood (17.5 miles) and Chippenham (18.1 miles), measured as the crow flies. Frome is about 20 miles from Bristol.
Local details
- Area
- Somerset, England
- Highway authority
- Somerset Council (local roads)
- Planning authority
- Somerset Council
- Postcodes
- BA11
- Guide price
- Typically £95–£345 per post + VAT (£105–£405 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Trowbridge (8 mi), Bath (10.3 mi), Kingswood (17.5 mi), Chippenham (18.1 mi)
What Frome sites use timber bollards for
Common uses in a place like Frome:
- Footpath and bridleway entrances
- Landscaped car parks and picnic areas
- Holiday parks, campsites and farm shops
What timber bollards cost in Frome
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £95–£205 + VAT · £105–£245 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £175–£275 + VAT · £205–£325 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £245–£345 + VAT · £285–£405 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Frome
Somerset Council is the highway authority covering Frome's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Frome is listed or inside a conservation area, check with the local planning authority (Somerset Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay holds water against the timber and benefits from a free-draining stone base; sandy ground may need a concrete surround to stop posts loosening. Turf around new posts is reinstated and, on sites used by mowers, posts are spaced so equipment can pass.
- Keep emergency vehicle access available, using a removable or hinged post where a route must open.
- Check whether the verge is highway land; posts there usually need the highway authority's agreement.
From survey to handover
Survey the setting
A free site survey looks at the ground, drainage, tree roots, how vehicles currently get onto the land and how the site looks. You receive a fixed written quote with species, size and fixing.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Finish and tidy
Reflective bands are fitted, turf is reinstated around the posts and spoil is removed or spread as agreed.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective bands and studs | Reflective bands, white painted tops or inset studs so posts are visible on unlit sites. |
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
| Fixing methods | Direct burial in compacted stone, set in concrete with a shaped collar, or mounted on a steel shoe or socket. |
What affects the quote
Two Frome jobs with the same number of posts can price quite differently. The usual reasons:
- Fixing method: stone, concrete or steel shoe
- Removable or hinged posts for access
- Number of posts and length of the line
Looking after them
New oak can release tannin that stains nearby paving for the first season; this weathers away. Timber naturally moves, checks and splits along its length as it dries; surface cracks in oak and hardwood are normal and rarely affect strength.
If posts in Frome are later hit or damaged, we can repair or replace them — see bollard repairs.
Timber bollards in Frome: FAQs
Do you install timber bollards in Frome?
We cover all of Frome (BA11) and the rest of Somerset. We also work in Trowbridge, Bath and Kingswood.
Do I need consent for timber bollards on a public footway in Frome?
The highway authority for local roads in Frome is Somerset Council; motorways and trunk roads sit with National Highways. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do timber bollards cost in Frome?
In Frome, typically £95–£345 per post, supplied and installed, plus VAT (£105–£405 including VAT for homeowners), with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
How long will a timber bollard last in the ground?
It depends on species, treatment and how the post is set. Dense hardwoods and oak heartwood last much longer than softwood, and posts that are kept out of standing water last longer than those sitting in wet concrete. A steel shoe that keeps timber off the ground extends life considerably.
Is tropical hardwood a sustainable choice?
It can be, if it comes from certified sustainable sources. Ask for certification with the order. Oak and treated softwood from managed forests are alternatives.
Timber bollards in nearby towns
- Trowbridge (8 mi)
- Bath (10.3 mi)
- Kingswood (17.5 mi)
- Chippenham (18.1 mi)
- Mangotsfield (19.6 mi)
- Bristol (19.7 mi)