East Sussex · England
Concrete bollard installation in Hove
Concrete bollards supplied and fitted in Hove, East Sussex: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout concrete bollards in Hove
We supply and fit concrete bollards throughout Hove, typically for sites such as college campuses, housing association car parks and supermarket frontages. Precast concrete and reconstituted stone bollards for public realm, parks, boundaries and estates, dowelled or bedded in place.
We cover every part of Hove in the BN3 postcode district. Nearby, we also work in Brighton (1.2 miles), Portslade (2.3 miles), Rottingdean (4.9 miles) and Burgess Hill (8.9 miles), measured as the crow flies.
Hove at a glance
- Area
- East Sussex, England
- Highway authority
- Brighton and Hove City Council (local roads)
- Planning authority
- Brighton and Hove City Council
- Postcodes
- BN3
- Guide price
- Typically £185–£635 per bollard + VAT; minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Brighton (1.2 mi), Portslade (2.3 mi), Rottingdean (4.9 mi), Burgess Hill (8.9 mi)
What concrete bollards cost in Hove
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£375 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£505 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £455–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What Hove sites use concrete bollards for
Common uses in a place like Hove:
- Edges of open land and verges subject to unauthorised vehicle access
- Housing estates and communal areas
- Rural and coastal sites where steel would corrode
What we check first in Hove
Brighton and Hove City Council is the highway authority covering Hove's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Hove need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Brighton and Hove City Council before posts go in.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
Installation, step by step
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Excavate and cast foundations
Small foundations are excavated, checked for services and cast with a dowel hole or sleeve at the right position and level.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Finishes and options
| Option | Detail |
|---|---|
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
| Precast concrete | Grey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option. |
| Dowel-fixed or root-set | Dowels grouted into a foundation for most installations; root-set posts buried in the ground on softer sites. |
What moves the price in Hove
When we price concrete bollards in Hove, these make the biggest difference:
- Number of bollards
- Lifting equipment and access for delivery
- Precast concrete or reconstituted stone
Keeping them working
Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
If posts in Hove are later hit or damaged, we can repair or replace them — see bollard repairs.
Concrete bollards in Hove: FAQs
Do you install concrete bollards in Hove?
We cover all of Hove (BN3) and the rest of East Sussex. We also work in Brighton, Portslade and Rottingdean.
Who gives permission for bollards on the pavement in Hove?
The highway authority for local roads in Hove is Brighton and Hove City Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do concrete bollards cost in Hove?
In Hove, typically £185–£635 per bollard, supplied and installed, plus VAT, with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can a chipped concrete bollard be repaired?
Small chips and edge damage can be filled with colour-matched mortar. A bollard cracked through or broken at its base needs replacing. Matching finishes is easier if the original product is still made.
Are concrete bollards anti-ram?
Only if that specific product has been crash-tested. Weight alone does not make a bollard crash-rated, and an untested concrete post can crack or shear when hit hard. Tested concrete-clad products exist for security use.
Concrete bollards in nearby towns
- Brighton (1.2 mi)
- Portslade (2.3 mi)
- Rottingdean (4.9 mi)
- Burgess Hill (8.9 mi)
- Worthing (9.1 mi)
- Haywards Heath (11.9 mi)