Flintshire · Wales
Concrete bollard installation in Deeside
Planning concrete bollards in Deeside? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageConcrete bollards in Deeside
Across Deeside, typical sites for concrete bollards include filling-station forecourts, community buildings and schools. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
Coverage in Deeside takes in the CH5 postcode district and nearby places like Shotton, Garden City, Ewloe and Big Mancot. Jobs in Deeside can be combined with work in Flint (4.9 miles), Mold (4.9 miles), Coedpoeth (10.2 miles) and Wrexham (10.8 miles) (straight-line distances).
Key facts for this area
- Area
- Flintshire, Wales
- Highway authority
- Flintshire County Council (local roads)
- Planning authority
- Flintshire County Council
- Postcodes
- CH5
- Guide price
- Typically £165–£575 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
What Deeside sites use concrete bollards for
Common uses in a place like Deeside:
- Rural and coastal sites where steel would corrode
- Housing estates and communal areas
- School, library and civic building forecourts
Deeside: typical concrete bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £165–£345 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £295–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £415–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
What we check first in Deeside
Before digging near the kerb in Deeside we establish who owns the ground: adopted footways are Flintshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Deeside is listed or inside a conservation area, check with the local planning authority (Flintshire County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Access for the lifting vehicle matters: soft grass, paving and kerbs can be damaged by an outrigger, so ground protection mats are often laid before lifting begins.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
Installation, step by step
Excavate and cast foundations
Small foundations are excavated, checked for services and cast with a dowel hole or sleeve at the right position and level.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Protect while the grout cures
Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.
Choosing the right spec
| Option | Detail |
|---|---|
| Dowel-fixed or root-set | Dowels grouted into a foundation for most installations; root-set posts buried in the ground on softer sites. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
What moves the price in Deeside
Our Wales guide prices are a starting point; the survey in Deeside firms them up. What tends to move them:
- Size, shape and surface finish
- Foundation depth and ground conditions
- Lifting equipment and access for delivery
After installation
Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
If posts in Deeside are later hit or damaged, we can repair or replace them — see bollard repairs.
Concrete bollards in Deeside: FAQs
Do you install concrete bollards in Deeside?
We cover all of Deeside (CH5) and the rest of Flintshire. We also work in Flint, Mold and Coedpoeth.
Who gives permission for bollards on the pavement in Deeside?
In Deeside the highway authority for local roads is Flintshire County Council. We confirm whether the ground is adopted highway before quoting, because concrete bollards on a public footway need its agreement first.
What's a typical price for concrete bollards in Deeside?
In Deeside, typically £165–£575 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How heavy are concrete bollards?
Often well over a hundred kilograms each, and larger designs several times that. The exact weight depends on size and shape. It means they are delivered and set using lifting equipment rather than by hand.
How are concrete bollards fixed down?
Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.