Greater Manchester · England
Concrete bollard installation in Tyldesley
Concrete bollards supplied and fitted in Tyldesley, Greater Manchester: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageTyldesley concrete bollards
Across Tyldesley, typical sites for concrete bollards include high street shopfronts, community car parks and schools. Precast concrete and reconstituted stone bollards for public realm, parks, boundaries and estates, dowelled or bedded in place.
Coverage in Tyldesley takes in the M29 postcode district. Nearby, we also work in Atherton (1.3 miles), Leigh (2.5 miles), Walkden (2.8 miles) and Westhoughton (3.4 miles), measured as the crow flies. It sits roughly 10 miles from Manchester as the crow flies.
Tyldesley at a glance
- Area
- Greater Manchester, England
- Highway authority
- Wigan Council (local roads)
- Planning authority
- Wigan Council
- Postcodes
- M29
- Guide price
- Typically £175–£585 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Atherton (1.3 mi), Leigh (2.5 mi), Walkden (2.8 mi), Westhoughton (3.4 mi)
Concrete bollard prices in Tyldesley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£345 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £295–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £415–£585 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Concrete bollards in Tyldesley: common uses
Around Tyldesley, concrete bollards usually solve one of these:
- Park entrances and greens where vehicles should not drive
- Rural and coastal sites where steel would corrode
- Edges of open land and verges subject to unauthorised vehicle access
Permissions and groundwork in Tyldesley
In Tyldesley, work on adopted pavements and verges needs consent from Wigan Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Tyldesley is listed or inside a conservation area, check with the local planning authority (Wigan Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Access for the lifting vehicle matters: soft grass, paving and kerbs can be damaged by an outrigger, so ground protection mats are often laid before lifting begins. Services under footways are traced before excavation.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
- Do not present untested concrete bollards as crash-rated protection.
Installation, step by step
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Excavate and cast foundations
Small foundations are excavated, checked for services and cast with a dowel hole or sleeve at the right position and level.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Finishes and options
| Option | Detail |
|---|---|
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
| Precast concrete | Grey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option. |
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
What moves the price in Tyldesley
Two Tyldesley jobs with the same number of posts can price quite differently. The usual reasons:
- Lifting equipment and access for delivery
- Reinstatement of paving or turf
- Foundation depth and ground conditions
Keeping them working
In areas salted heavily in winter, check for surface spalling. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
For damaged or loose posts in Tyldesley, repairs and replacements are priced in writing first.
Common questions
Which parts of Tyldesley do you cover for concrete bollards?
We cover all of Tyldesley (M29) and the rest of Greater Manchester. We also work in Atherton, Leigh and Walkden.
Do I need consent for concrete bollards on a public footway in Tyldesley?
In Tyldesley, work on adopted pavements and verges needs consent from Wigan Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for concrete bollards in Tyldesley?
In Tyldesley, typically £175–£585 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Should we use concrete or steel bollards?
Concrete suits landscaped and public spaces where appearance and low maintenance matter and where impacts are rare. Steel suits car parks and yards where knocks are frequent, because it bends rather than shatters. Many schemes use both in different places.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Concrete bollards in nearby towns
- Atherton (1.3 mi)
- Leigh (2.5 mi)
- Walkden (2.8 mi)
- Westhoughton (3.4 mi)
- Farnworth (3.7 mi)
- Hindley (4.9 mi)