Perth and Kinross · Scotland
Concrete bollard installation in Blairgowrie
Concrete bollards for sites across Blairgowrie and the rest of Perth and Kinross, from the first measurement to the last relaid paving block.
Computer-generated imageConcrete bollards in Blairgowrie
From high street shopfronts, local parades and filling-station forecourts, Blairgowrie has plenty of places where concrete bollards earn their keep. Precast concrete and reconstituted stone bollards for public realm, parks, boundaries and estates, dowelled or bedded in place.
Coverage in Blairgowrie takes in the PH10, PH13 and PH11 postcode districts and nearby places like Carsie, Kinloch, Bridge of Cally and Coupar Angus. We also cover neighbouring Perth (14 miles), Dundee (16.3 miles) and Forfar (17.5 miles) — distances are straight-line.
Blairgowrie at a glance
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH10, PH13 and PH11
- Guide price
- Typically £175–£595 per bollard + VAT; minimum job £595
- Survey
- Free, with a fixed written quote
Guide prices for Blairgowrie
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£475 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Concrete bollards in Blairgowrie: common uses
Typical reasons Blairgowrie sites choose concrete bollards:
- Retail parks and landscaped car parks
- Housing estates and communal areas
- Edges of open land and verges subject to unauthorised vehicle access
Consents, ground and services in Blairgowrie
For anything on the public footway in Blairgowrie we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Perth and Kinross Council can confirm before anything is ordered.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
- On public highway or council land, agree positions and specification with the roads authority or landowner.
From survey to handover
Excavate and cast foundations
Small foundations are excavated, checked for services and cast with a dowel hole or sleeve at the right position and level.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Options to consider
| Option | Detail |
|---|---|
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
| Dowel-fixed or root-set | Dowels grouted into a foundation for most installations; root-set posts buried in the ground on softer sites. |
| Precast concrete | Grey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Blairgowrie firms them up. What tends to move them:
- Precast concrete or reconstituted stone
- Number of bollards
- Size, shape and surface finish
Keeping them working
Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing. In areas salted heavily in winter, check for surface spalling.
If posts in Blairgowrie are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about concrete bollards in Blairgowrie
Which parts of Blairgowrie do you cover for concrete bollards?
We cover all of Blairgowrie (PH10, PH13 and PH11) and the rest of Perth and Kinross. We also work in Perth, Dundee and Forfar.
Who gives permission for bollards on the pavement in Blairgowrie?
In Scotland the council is the roads authority for local roads, which in Blairgowrie means Perth and Kinross Council. Concrete bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
How much do concrete bollards cost in Blairgowrie?
In Blairgowrie, typically £175–£595 per bollard, supplied and installed, plus VAT, with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Are concrete bollards anti-ram?
Only if that specific product has been crash-tested. Weight alone does not make a bollard crash-rated, and an untested concrete post can crack or shear when hit hard. Tested concrete-clad products exist for security use.
Can a chipped concrete bollard be repaired?
Small chips and edge damage can be filled with colour-matched mortar. A bollard cracked through or broken at its base needs replacing. Matching finishes is easier if the original product is still made.