Perth and Kinross · Scotland
Concrete bollard installation in Perth
Local installation of concrete bollards in Perth — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout concrete bollards in Perth
Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings. In Perth, that tends to mean sites such as small industrial units, high street shopfronts and filling-station forecourts.
We cover Perth's PH2 and PH1 postcode districts, including places such as Scone, Bridge of Earn, Errol and Abernethy. We also cover neighbouring Blairgowrie (14 miles), Glenrothes (17 miles), Dundee (18.2 miles) and Cowdenbeath (19.9 miles) — distances are straight-line.
Perth at a glance
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH2 and PH1
- Guide price
- Typically £175–£595 per bollard + VAT; minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Blairgowrie (14 mi), Glenrothes (17 mi), Dundee (18.2 mi), Cowdenbeath (19.9 mi)
What concrete bollards cost in Perth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£475 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Concrete bollards in Perth: common uses
Typical reasons Perth sites choose concrete bollards:
- Park entrances and greens where vehicles should not drive
- Housing estates and communal areas
- Rural and coastal sites where steel would corrode
What we check first in Perth
For anything on the public footway in Perth we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
If your site in Perth is listed or inside a conservation area, check with the local planning authority (Perth and Kinross Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Because concrete bollards are heavy, a weak foundation shows itself quickly as a tilt.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians pass, checking against Inclusive Mobility guidance.
- Do not present untested concrete bollards as crash-rated protection.
What happens on site
Survey and choose
A free site survey looks at the setting, ground, delivery access and where a lifting vehicle can stand. You receive a fixed written quote with the product, finish and fixing.
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Finishes and options
| Option | Detail |
|---|---|
| Dowel-fixed or root-set | Dowels grouted into a foundation for most installations; root-set posts buried in the ground on softer sites. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
Pricing concrete bollards in Perth
When we price concrete bollards in Perth, these make the biggest difference:
- Reinstatement of paving or turf
- Lifting equipment and access for delivery
- Number of bollards
Looking after them
Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known. Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean.
If posts in Perth are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install concrete bollards anywhere in Perth?
We cover all of Perth (PH2 and PH1) and the rest of Perth and Kinross. We also work in Blairgowrie, Glenrothes and Dundee.
Do I need consent for concrete bollards on a public footway in Perth?
In Scotland the council is the roads authority for local roads, which in Perth means Perth and Kinross Council. Concrete bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for concrete bollards in Perth?
In Perth, typically £175–£595 per bollard, supplied and installed, plus VAT, with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How are concrete bollards fixed down?
Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.
Can a chipped concrete bollard be repaired?
Small chips and edge damage can be filled with colour-matched mortar. A bollard cracked through or broken at its base needs replacing. Matching finishes is easier if the original product is still made.
Concrete bollards in nearby towns
- Blairgowrie (14 mi)
- Glenrothes (17 mi)
- Dundee (18.2 mi)
- Cowdenbeath (19.9 mi)
- Methil (21.4 mi)
- Kirkcaldy (21.9 mi)