Perth and Kinross · Scotland
Removable bollard installation in Perth
Local installation of removable bollards in Perth — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imagePerth removable bollards
Whether it's community car parks, residential driveways and local parades, removable bollards in Perth are planned around who needs to get through and who doesn't. When the post is out, the socket is closed with a hinged lid or cap so the surface is flush.
Coverage in Perth takes in the PH2 and PH1 postcode districts and nearby places like Scone, Bridge of Earn, Errol and Abernethy. We also cover neighbouring Blairgowrie (14 miles), Glenrothes (17 miles), Dundee (18.2 miles) and Cowdenbeath (19.9 miles) — distances are straight-line.
Perth at a glance
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH2 and PH1
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Blairgowrie (14 mi), Glenrothes (17 mi), Dundee (18.2 mi), Cowdenbeath (19.9 mi)
Guide prices for Perth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Perth sites use removable bollards for
Common uses in a place like Perth:
- Emergency and fire service access routes
- Maintenance tracks through parks and open spaces
- Gaps in a fixed bollard line that must open occasionally
Before we dig in Perth
In Scotland the council is the roads authority for local roads, which in Perth means Perth and Kinross Council. Removable bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Perth is listed or inside a conservation area, check with the local planning authority (Perth and Kinross Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
A socket set even a few millimetres proud becomes a trip edge and gets clipped by tyres and snow ploughs; one set low collects water and grit. On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
From survey to handover
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Specification choices
| Option | Detail |
|---|---|
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
What affects the quote
Two Perth jobs with the same number of posts can price quite differently. The usual reasons:
- Drainage at the socket base
- Lock type and whether locks are keyed alike
- Rated removable posts where security is required
After installation
Removable bollards fail in predictable ways: seized locks, sockets full of grit and lids that no longer close. Check the lid springs and hinges.
We can also service, repair or replace existing posts anywhere in Perth.
Common questions
Do you install removable bollards in Perth?
We cover all of Perth (PH2 and PH1) and the rest of Perth and Kinross. We also work in Blairgowrie, Glenrothes and Dundee.
Do I need consent for removable bollards on a public footway in Perth?
For anything on the public footway in Perth we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for removable bollards in Perth?
In Perth, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.
Where do we keep the post when it is removed?
Somewhere it cannot become a trip hazard or be taken. A wall-mounted storage bracket or a locked store nearby works well. Leaving posts lying on the ground is how they get damaged or lost.
Removable bollards in nearby towns
- Blairgowrie (14 mi)
- Glenrothes (17 mi)
- Dundee (18.2 mi)
- Cowdenbeath (19.9 mi)
- Methil (21.4 mi)
- Kirkcaldy (21.9 mi)