Perth and Kinross · Scotland
Telescopic bollard installation in Perth
Local installation of telescopic bollards in Perth — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout telescopic bollards in Perth
From community car parks, local parades and high street shopfronts, Perth has plenty of places where telescopic bollards earn their keep. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across PH2 and PH1 — Perth itself and places including Scone, Bridge of Earn, Errol and Abernethy. We also cover neighbouring Blairgowrie (14 miles), Glenrothes (17 miles), Dundee (18.2 miles) and Cowdenbeath (19.9 miles) — distances are straight-line.
Perth at a glance
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH2 and PH1
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Blairgowrie (14 mi), Glenrothes (17 mi), Dundee (18.2 mi), Cowdenbeath (19.9 mi)
Where telescopic bollards go in around Perth
Typical reasons Perth sites choose telescopic bollards:
- Sites with no power for automatic bollards
- Access roads closed outside working hours
- Allocated parking bays in flats and private developments
Perth: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Perth
Perth falls under Perth and Kinross Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Perth and Kinross Council can confirm before anything is ordered.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- If the drive is shared, agree positions and keys with the other users first.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
How the job runs
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Options to consider
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
What moves the price in Perth
Two Perth jobs with the same number of posts can price quite differently. The usual reasons:
- Drainage: simple soakaway or a connection to a drain
- Post size and whether lift assistance is wanted
- Number of posts and keyed-alike locks
After installation
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
If posts in Perth are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install telescopic bollards in Perth?
We cover all of Perth (PH2 and PH1) and the rest of Perth and Kinross. We also work in Blairgowrie, Glenrothes and Dundee.
Do I need consent for telescopic bollards on a public footway in Perth?
For anything on the public footway in Perth we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do telescopic bollards cost in Perth?
In Perth, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Telescopic bollards in nearby towns
- Blairgowrie (14 mi)
- Glenrothes (17 mi)
- Dundee (18.2 mi)
- Cowdenbeath (19.9 mi)
- Methil (21.4 mi)
- Kirkcaldy (21.9 mi)