Perth and Kinross · Scotland
Telescopic bollard installation in Blairgowrie
Telescopic bollards for sites across Blairgowrie and the rest of Perth and Kinross, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Blairgowrie
Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads. In Blairgowrie, that tends to mean sites such as small industrial units, local parades and high street shopfronts.
We work across PH10, PH13 and PH11 — Blairgowrie itself and places including Carsie, Kinloch, Bridge of Cally and Coupar Angus. Jobs in Blairgowrie can be combined with work in Perth (14 miles), Dundee (16.3 miles) and Forfar (17.5 miles) (straight-line distances).
Local details
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH10, PH13 and PH11
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
Telescopic bollard prices in Blairgowrie
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical telescopic bollards jobs in Blairgowrie
Common uses in a place like Blairgowrie:
- Car parks where a removable post would go missing
- Access roads closed outside working hours
- Sites with no power for automatic bollards
Before we dig in Blairgowrie
In Scotland the council is the roads authority for local roads, which in Blairgowrie means Perth and Kinross Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Perth and Kinross Council can confirm before anything is ordered.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- If the drive is shared, agree positions and keys with the other users first.
What happens on site
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
What moves the price in Blairgowrie
Two Blairgowrie jobs with the same number of posts can price quite differently. The usual reasons:
- Post size and whether lift assistance is wanted
- Number of posts and keyed-alike locks
- Excavation depth and the presence of services under the drive
Keeping them working
Lubricate the lock with a suitable spray, especially before winter. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
If posts in Blairgowrie are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Blairgowrie: FAQs
Which parts of Blairgowrie do you cover for telescopic bollards?
We cover all of Blairgowrie (PH10, PH13 and PH11) and the rest of Perth and Kinross. We also work in Perth, Dundee and Forfar.
Do I need consent for telescopic bollards on a public footway in Blairgowrie?
For anything on the public footway in Blairgowrie we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for telescopic bollards in Blairgowrie?
In Blairgowrie, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.