Bollard Installers

Perth and Kinross · Scotland

Fold-down parking post installation in Perth

Fold-down parking posts supplied and fitted in Perth, Perth and Kinross: surveyed, scanned for services, set in proper foundations and finished to match the ground.

Yellow fold-down parking post part-folded on its padlocked hinge in a marked residential parking bayComputer-generated image

About fold-down parking posts in Perth

Across Perth, typical sites for fold-down parking posts include small industrial units, local parades and community buildings. Because it is surface-fixed, it needs no excavation in most cases.

Coverage in Perth takes in the PH2 and PH1 postcode districts and nearby places like Scone, Bridge of Earn, Errol and Abernethy. We also cover neighbouring Blairgowrie (14 miles), Glenrothes (17 miles), Dundee (18.2 miles) and Cowdenbeath (19.9 miles) — distances are straight-line.

Perth at a glance

Area
Perth and Kinross, Scotland
Roads authority
Perth and Kinross Council (local roads)
Planning authority
Perth and Kinross Council
Postcodes
PH2 and PH1
Guide price
Typically £145–£445 per post + VAT (£165–£525 inc VAT for homes); minimum job £345
Survey
Free, with a fixed written quote
Nearby
Blairgowrie (14 mi), Glenrothes (17 mi), Dundee (18.2 mi), Cowdenbeath (19.9 mi)

Fold-down parking post prices in Perth

SpecificationGuide priceIncludes
Standard£145–£275 + VAT · £165–£325 inc VATStandard post, foundation, reinstatement
Upgraded£235–£365 + VAT · £275–£435 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£325–£445 + VAT · £385–£525 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.

Where fold-down parking posts go in around Perth

Around Perth, fold-down parking posts usually solve one of these:

  • Allocated bays in flats and apartment car parks
  • Shared courtyards with marked spaces
  • Disabled bays that keep being taken by other drivers

What we check first in Perth

For anything on the public footway in Perth we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.

Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Perth and Kinross Council can confirm before anything is ordered.

Concrete of reasonable thickness holds resin anchors well. Where the car park has heating cables or a membrane, the fixing method is agreed before drilling.

  • Do not fit posts that block emergency access routes or reduce the usable width of a fire lane.
  • Check drilling into car park decks or podium slabs with the building owner, as they may contain tendons or membranes.

From survey to handover

Survey the bay

A free site survey looks at the surface, the bay layout and where wheels run. You receive a fixed written quote for the posts, locks and any concrete pad.

Position the post

The post is placed where your car can straddle it when folded, usually central to the bay entrance, so tyres do not run over the hinge every day.

Fit and torque

The base plate is fixed down and bolts tightened to the anchor maker's figure once the resin has cured. Anti-tamper bolt heads or caps can be fitted.

Options to consider

OptionDetail
Integral key lockBuilt-in cylinder lock with no loose parts; can often be supplied keyed alike across a development.
Fixing methodsResin anchors or through-bolts into concrete, or a small concrete pad where the existing surface is too weak.
Post shapesRound or square single posts, T-bar, and hoop styles for a wider barrier across the bay entrance.

What moves the price in Perth

Two Perth jobs with the same number of posts can price quite differently. The usual reasons:

  • Padlocked, integral-lock or remote-control post
  • Number of bays and keyed-alike locks
  • Surface type and whether a concrete pad is needed

After installation

Fold-down posts are simple, but hinges and locks are exposed to grit and weather. Replace padlocks that have become stiff or rusty before they seize.

For damaged or loose posts in Perth, repairs and replacements are priced in writing first.

Fold-down parking posts in Perth: FAQs

Which parts of Perth do you cover for fold-down parking posts?

We cover all of Perth (PH2 and PH1) and the rest of Perth and Kinross. We also work in Blairgowrie, Glenrothes and Dundee.

Who gives permission for bollards on the pavement in Perth?

For anything on the public footway in Perth we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.

How much do fold-down parking posts cost in Perth?

In Perth, typically £145–£445 per post, supplied and installed, plus VAT (£165–£525 including VAT for homeowners), with a minimum job of £345 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.

Will I damage my car driving over a folded post?

Not if the post is positioned to sit between your wheels and folds low enough for your car's clearance. We check the folded height at installation. Very low cars may need a lower-profile design.

Can someone simply unbolt the post?

Anti-tamper bolt heads or caps make it much harder, and the bolts are covered by the post when it is upright on many designs. Resin anchors set into concrete are also hard to remove without tools and time.

Fold-down parking posts in nearby towns

More from us in Perth

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote