Perth and Kinross · Scotland
Steel security bollard installation in Perth
Steel security bollards for sites across Perth and the rest of Perth and Kinross, from the first measurement to the last relaid paving block.
Computer-generated imageSteel security bollards in Perth
Steel security bollards suit plenty of Perth sites, filling-station forecourts, town-centre squares and small industrial units among them. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
We work across PH2 and PH1 — Perth itself and places including Scone, Bridge of Earn, Errol and Abernethy. We also cover neighbouring Blairgowrie (14 miles), Glenrothes (17 miles), Dundee (18.2 miles) and Cowdenbeath (19.9 miles) — distances are straight-line.
Key facts for this area
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH2 and PH1
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Blairgowrie (14 mi), Glenrothes (17 mi), Dundee (18.2 mi), Cowdenbeath (19.9 mi)
Where steel security bollards go in around Perth
Typical reasons Perth sites choose steel security bollards:
- Grass verges and landscaped areas that vans keep driving over
- Forecourts and building entrances needing a visible boundary
- Lines between pedestrian routes and service yards
Perth: typical steel security bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Perth
In Scotland the council is the roads authority for local roads, which in Perth means Perth and Kinross Council. Steel security bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Perth and Kinross Council can confirm before anything is ordered.
Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found. Reinstatement matches the surface, whether tarmac, block paving, flags or turf.
- Check whether the land is public highway or adopted verge before installing; the roads authority's agreement is usually needed.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
From survey to handover
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Options to consider
| Option | Detail |
|---|---|
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
| Concrete infill | Adds mass and stiffness and makes the post harder to cut or dent. Usually specified for security and impact positions. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Perth firms them up. What tends to move them:
- Tube diameter, wall thickness and concrete infill
- Finish: galvanised only or powder-coated
- Surface reinstatement such as block paving or tarmac
After installation
Reflective bands fade and peel and are easy to renew. Check periodically for impact damage, loose base plates and cracked surfacing around the root.
For damaged or loose posts in Perth, repairs and replacements are priced in writing first.
Steel security bollards in Perth: FAQs
Can you install steel security bollards anywhere in Perth?
We cover all of Perth (PH2 and PH1) and the rest of Perth and Kinross. We also work in Blairgowrie, Glenrothes and Dundee.
Do I need consent for steel security bollards on a public footway in Perth?
For anything on the public footway in Perth we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for steel security bollards in Perth?
In Perth, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Why fill a steel bollard with concrete?
Concrete infill adds weight and stiffness, so the post dents less and is harder to cut. It also stops water collecting inside a hollow tube. It is usual for security and impact positions.
Will galvanised posts rust?
Hot-dip galvanising protects steel for a long time in normal outdoor conditions. Powder coat over the galvanising adds colour and extra protection. Touch up chips promptly in coastal or heavily salted locations.
Steel security bollards near Perth
- Blairgowrie (14 mi)
- Glenrothes (17 mi)
- Dundee (18.2 mi)
- Cowdenbeath (19.9 mi)
- Methil (21.4 mi)
- Kirkcaldy (21.9 mi)