Perth and Kinross · Scotland
Lighting bollard installation in Perth
Planning lighting bollards in Perth? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout lighting bollards in Perth
In the city of Perth, lighting bollards tend to go in at schools, small industrial units and community car parks. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
We cover Perth's PH2 and PH1 postcode districts, including places such as Scone, Bridge of Earn, Errol and Abernethy. Jobs in Perth can be combined with work in Blairgowrie (14 miles), Glenrothes (17 miles), Dundee (18.2 miles) and Cowdenbeath (19.9 miles) (straight-line distances).
Key facts for this area
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH2 and PH1
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £845
- Survey
- Free, with a fixed written quote
- Nearby
- Blairgowrie (14 mi), Glenrothes (17 mi), Dundee (18.2 mi), Cowdenbeath (19.9 mi)
Typical lighting bollards jobs in Perth
Common uses in a place like Perth:
- Parks and areas where tall columns would be intrusive
- Footpaths through housing developments and campuses
- Car park walkways and pedestrian crossings
Guide prices for Perth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Perth
In Scotland the council is the roads authority for local roads, which in Perth means Perth and Kinross Council. Lighting bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Perth and Kinross Council can confirm before anything is ordered.
Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services. Most of the work in a lighting bollard scheme is underground.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
- In homes, new outdoor circuits are often notifiable building work; a registered electrician can usually self-certify it.
Installation, step by step
Survey and lighting layout
A free site survey looks at the routes to be lit, where power can come from, surfaces and buried services. Bollard spacing is set from the product's light data, and you receive a fixed written quote.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Choosing the right spec
| Option | Detail |
|---|---|
| Controls | Photocells, timers, motion sensors and dimming to light only when and as much as needed. |
| Mains LED bollards | Wired from a dedicated circuit for reliable lighting of paths and car parks. Needs cable routes and electrical certification. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
What moves the price in Perth
Two Perth jobs with the same number of posts can price quite differently. The usual reasons:
- Distance from the supply and circuit requirements
- Length of cable routes and surfaces to be cut
- Reinstatement of paving, tarmac or planting
Looking after them
Photocells and timers need resetting when the clocks change unless they adjust automatically. Clean diffusers so dirt and algae do not dim the light, check seals and fixings, and look for impact damage, especially in car parks.
For damaged or loose posts in Perth, repairs and replacements are priced in writing first.
Common questions
Can you install lighting bollards anywhere in Perth?
We cover all of Perth (PH2 and PH1) and the rest of Perth and Kinross. We also work in Blairgowrie, Glenrothes and Dundee.
Who gives permission for bollards on the pavement in Perth?
In Scotland the council is the roads authority for local roads, which in Perth means Perth and Kinross Council. Lighting bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for lighting bollards in Perth?
In Perth, typically £345–£1,195 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £845 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will lighting bollards survive in a car park?
Choose robust bodies with a high impact rating and place them where vehicles are unlikely to hit them, such as behind kerbs or alongside protective posts. A lighting bollard is not designed to stop a car.
Are solar bollard lights worth it?
For marking edges and low-use paths, they can be, because there is no cabling to install. They give less light than mains bollards and perform poorly in shaded spots and short winter days. For lighting a route properly, mains bollards are more dependable.
Lighting bollards near Perth
- Blairgowrie (14 mi)
- Glenrothes (17 mi)
- Dundee (18.2 mi)
- Cowdenbeath (19.9 mi)
- Methil (21.4 mi)
- Kirkcaldy (21.9 mi)