Scotland · 6 towns
Crash-rated bollard installation in Aberdeenshire
Crash-rated bollards for sites across Aberdeenshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in Aberdeenshire
We supply and install crash-rated bollards across Aberdeenshire, with local pages for 6 towns below. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Highway and roads authorities for local roads in Aberdeenshire: Aberdeenshire Council.
Choose your town in Aberdeenshire
Guide prices in Aberdeenshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in Aberdeenshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Peterhead | Aberdeenshire Council | Aberdeenshire Council |
| Inverurie | Aberdeenshire Council | Aberdeenshire Council |
| Fraserburgh | Aberdeenshire Council | Aberdeenshire Council |
| Westhill | Aberdeenshire Council | Aberdeenshire Council |
| Stonehaven | Aberdeenshire Council | Aberdeenshire Council |
| Ellon | Aberdeenshire Council | Aberdeenshire Council |
Rules for crash-rated bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Scotland.
How installation works
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Crash-rated bollards in Aberdeenshire: FAQs
Do you cover all of Aberdeenshire for crash-rated bollards?
Yes — including Peterhead, Inverurie, Fraserburgh, Westhill, Stonehaven and Ellon. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in Aberdeenshire?
In Aberdeenshire, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Aberdeenshire?
The council is the roads authority for local roads (Aberdeenshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.