Scotland · 2 towns
Crash-rated bollard installation in Argyll and Bute
Crash-rated bollards for sites across Argyll and Bute: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in Argyll and Bute
Across Argyll and Bute, typical sites for crash-rated bollards include community car parks, schools and town-centre squares. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Highway and roads authorities for local roads in Argyll and Bute: Argyll and Bute Council.
Choose your town in Argyll and Bute
Guide prices in Argyll and Bute
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Who looks after the roads in Argyll and Bute
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Helensburgh | Argyll and Bute Council | Argyll and Bute Council |
| Dunoon | Argyll and Bute Council | Argyll and Bute Council |
Rules for crash-rated bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Scotland.
How installation works
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Crash-rated bollards in Argyll and Bute: FAQs
Do you cover all of Argyll and Bute for crash-rated bollards?
The mainland, yes — Bute, Mull, Islay and the other islands are outside our coverage. including Helensburgh and Dunoon. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in Argyll and Bute?
In Argyll and Bute, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Argyll and Bute?
The council is the roads authority for local roads (Argyll and Bute Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.