England · 6 towns
Crash-rated bollard installation in Cornwall
Crash-rated bollards for sites across Cornwall: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in Cornwall
We supply and install crash-rated bollards across Cornwall, with local pages for 6 towns below. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Highway authorities for local roads in Cornwall: Cornwall Council.
Choose your town in Cornwall
Guide prices in Cornwall
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in Cornwall
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Redruth | Cornwall Council | Cornwall Council |
| Falmouth | Cornwall Council | Cornwall Council |
| St Austell | Cornwall Council | Cornwall Council |
| Truro | Cornwall Council | Cornwall Council |
| Camborne | Cornwall Council | Cornwall Council |
| Newquay | Cornwall Council | Cornwall Council |
Rules for crash-rated bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in England.
How installation works
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Crash-rated bollards in Cornwall: FAQs
Do you cover all of Cornwall for crash-rated bollards?
Yes — including Redruth, Falmouth, St Austell, Truro, Camborne and Newquay. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in Cornwall?
In Cornwall, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Cornwall?
For local roads, Cornwall Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
When can we rely on the new bollards?
Only once the concrete has reached the strength set in the specification. The posts are physically in place as soon as the pour is finished, but the rated performance depends on the foundation, and full design strength is commonly taken at around 28 days. Your adviser may arrange temporary measures to cover the gap.