Greater Manchester · England
Crash-rated bollard installation in Eccles
Crash-rated bollards supplied and fitted in Eccles, Greater Manchester: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageCrash-rated bollards in Eccles
We supply and fit crash-rated bollards throughout Eccles, typically for sites such as community car parks, schools and small industrial units. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
We work across M30 and M44 — Eccles itself and places including Irlam. We also cover neighbouring Swinton (1.3 miles), Salford (1.8 miles), Stretford (2.4 miles) and Urmston (2.6 miles) — distances are straight-line. Eccles is about 4 miles from Manchester.
Eccles at a glance
- Area
- Greater Manchester, England
- Highway authority
- Salford City Council (local roads)
- Planning authority
- Salford City Council
- Postcodes
- M30 and M44
- Guide price
- Typically £1,945–£9,795 per bollard + VAT; minimum job £3,895
- Survey
- Free, with a fixed written quote
Typical crash-rated bollards jobs in Eccles
Around Eccles, crash-rated bollards usually solve one of these:
- Transport interchanges, taxi ranks and drop-off zones
- Stadiums, arenas and event venues with predictable crowd flows
- Sites where a vehicle dynamics assessment shows a long straight run-up
Guide prices for Eccles
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,295–£7,595 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,645–£9,795 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -2% for North West. Guide only — the fixed price follows a survey.
Consents, ground and services in Eccles
Salford City Council is the highway authority covering Eccles's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Eccles need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Salford City Council before posts go in.
Made ground, a high water table or soft clay may need an engineer to confirm the tested design suits the site; any change to depth, width or reinforcement must be agreed in writing by the manufacturer, or the rating may no longer apply. Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
- Ask the local planning authority whether consent is needed, particularly in conservation areas or near listed buildings.
From survey to handover
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Finishes and options
| Option | Detail |
|---|---|
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
| Decorative covers | Stainless steel, cast or polymer sleeves can be fitted over the steel core to suit a streetscape. Use covers supplied or approved by the manufacturer so the tested product is not altered. |
| Finishes and visibility bands | Galvanised and powder-coated finishes in RAL colours, with contrasting or reflective bands near the top so the posts are visible to pedestrians and drivers. |
What moves the price in Eccles
Our North West guide prices are a starting point; the survey in Eccles firms them up. What tends to move them:
- Reinstatement of natural stone, tactile paving or specialist surfaces
- Number of posts and whether a linked beam system is needed
- Covers, finishes and any integrated lighting
Looking after them
Keep inspection records with the original test certificate so the line's condition can be shown to insurers or a security adviser. Static rated bollards need little routine work, but they should be inspected periodically and always after any impact.
For damaged or loose posts in Eccles, repairs and replacements are priced in writing first.
Common questions
Can you install crash-rated bollards anywhere in Eccles?
We cover all of Eccles (M30 and M44) and the rest of Greater Manchester. We also work in Swinton, Salford and Stretford.
Who gives permission for bollards on the pavement in Eccles?
The highway authority for local roads in Eccles is Salford City Council; motorways and trunk roads sit with National Highways. Crash-rated bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for crash-rated bollards in Eccles?
In Eccles, typically £1,945–£9,795 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.
Crash-rated bollards near Eccles
- Swinton (1.3 mi)
- Salford (1.8 mi)
- Stretford (2.4 mi)
- Urmston (2.6 mi)
- Walkden (3.6 mi)
- Manchester (3.9 mi)