Greater Manchester · England
Crash-rated bollard installation in Manchester
Crash-rated bollards supplied and fitted in Manchester, Greater Manchester: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout crash-rated bollards in Manchester
In the city of Manchester, crash-rated bollards tend to go in at office forecourts, university campuses and pedestrianised streets. The rating only holds when the bollard is installed to the same foundation design that was tested.
We cover every part of Manchester in the M1, M2, M4, M15, M13 and M12 postcode districts. Jobs in Manchester can be combined with work in Salford (2.2 miles), Failsworth (3.4 miles), Droylsden (3.8 miles) and Eccles (3.9 miles) (straight-line distances). Manchester is about 6 miles from Oldham.
Manchester at a glance
- Area
- Greater Manchester, England
- Highway authority
- Manchester City Council (local roads)
- Planning authority
- Manchester City Council
- Postcodes
- M1, M2, M4, M15, M13, M12, M8 and M14
- Guide price
- Typically £1,945–£9,795 per bollard + VAT; minimum job £3,895
- Survey
- Free, with a fixed written quote
- Nearby
- Salford (2.2 mi), Failsworth (3.4 mi), Droylsden (3.8 mi), Eccles (3.9 mi)
What Manchester sites use crash-rated bollards for
Around Manchester, crash-rated bollards usually solve one of these:
- Pedestrianised streets, plazas and crowded public spaces
- Glazed frontages on corporate and public buildings
- Data centres, utilities and critical infrastructure perimeters
Manchester: typical crash-rated bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,295–£7,595 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,645–£9,795 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -2% for North West. Guide only — the fixed price follows a survey.
Consents, ground and services in Manchester
In Manchester, work on adopted pavements and verges needs consent from Manchester City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Manchester is listed or inside a conservation area, check with the local planning authority (Manchester City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches paving, tactile surfaces and kerbs. Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position.
- Confirm who owns the land: works on public highway usually need the highway authority's agreement, and permanent street furniture there may need a licence.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
How the job runs
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Choosing the right spec
| Option | Detail |
|---|---|
| Static rated bollards | Fixed posts for permanent lines where vehicles never need to pass. They are a straightforward rated option to install and maintain. |
| Finishes and visibility bands | Galvanised and powder-coated finishes in RAL colours, with contrasting or reflective bands near the top so the posts are visible to pedestrians and drivers. |
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
What affects the quote
When we price crash-rated bollards in Manchester, these make the biggest difference:
- Reinstatement of natural stone, tactile paving or specialist surfaces
- Number of posts and whether a linked beam system is needed
- Covers, finishes and any integrated lighting
After installation
Look for cracked surfacing at the base, movement, damaged covers and faded bands. A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened.
We can also service, repair or replace existing posts anywhere in Manchester.
Common questions
Do you install crash-rated bollards in Manchester?
We cover all of Manchester (M1, M2, M4, M15, M13 and M12) and the rest of Greater Manchester. We also work in Salford, Failsworth and Droylsden.
Do I need consent for crash-rated bollards on a public footway in Manchester?
The highway authority for local roads in Manchester is Manchester City Council; motorways and trunk roads sit with National Highways. Crash-rated bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do crash-rated bollards cost in Manchester?
In Manchester, typically £1,945–£9,795 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Why can't the foundation be adjusted to suit our ground?
Because the rating belongs to the bollard and foundation as tested together. Making the hole shallower, narrower or lighter on steel changes how the system behaves on impact. If site conditions force a change, the manufacturer has to approve it in writing, and some changes mean choosing a different product such as a shallow-mount system.
Is a heavy unrated steel post good enough instead?
Not where the risk is a deliberate vehicle attack. An unrated post may look solid, but nobody can say what it will stop because it has never been tested with its foundation. Unrated steel suits nuisance parking and low-speed knocks, not crowds or buildings flagged in a security assessment.
Crash-rated bollards near Manchester
- Salford (2.2 mi)
- Failsworth (3.4 mi)
- Droylsden (3.8 mi)
- Eccles (3.9 mi)
- Stretford (3.9 mi)
- Prestwich (4.1 mi)