Wales · 5 towns
Crash-rated bollard installation in Rhondda Cynon Taf
Crash-rated bollards for sites across Rhondda Cynon Taf: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in Rhondda Cynon Taf
Across Rhondda Cynon Taf, typical sites for crash-rated bollards include filling-station forecourts, high street shopfronts and community car parks. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Highway authorities for local roads in Rhondda Cynon Taf: Rhondda Cynon Taf County Borough Council.
Choose your town in Rhondda Cynon Taf
Guide prices in Rhondda Cynon Taf
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,195 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,245–£7,545 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,595–£9,695 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -3% for Wales. Guide only — the fixed price follows a survey.
Who looks after the roads in Rhondda Cynon Taf
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Rhondda | Rhondda Cynon Taf County Borough Council | Rhondda Cynon Taf County Borough Council |
| Pontypridd | Rhondda Cynon Taf County Borough Council | Rhondda Cynon Taf County Borough Council |
| Aberdare | Rhondda Cynon Taf County Borough Council | Rhondda Cynon Taf County Borough Council |
| Llantrisant | Rhondda Cynon Taf County Borough Council | Rhondda Cynon Taf County Borough Council |
| Mountain Ash | Rhondda Cynon Taf County Borough Council | Rhondda Cynon Taf County Borough Council |
Rules for crash-rated bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Crash-rated bollards in Rhondda Cynon Taf: FAQs
Do you cover all of Rhondda Cynon Taf for crash-rated bollards?
Yes — including Rhondda, Pontypridd, Aberdare, Llantrisant and Mountain Ash. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in Rhondda Cynon Taf?
In Rhondda Cynon Taf, typically £1,945–£9,695 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Rhondda Cynon Taf?
For local roads, Rhondda Cynon Taf County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
When can we rely on the new bollards?
Only once the concrete has reached the strength set in the specification. The posts are physically in place as soon as the pour is finished, but the rated performance depends on the foundation, and full design strength is commonly taken at around 28 days. Your adviser may arrange temporary measures to cover the gap.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.