West Midlands · England
Crash-rated bollard installation in Birmingham
Crash-rated bollards supplied and fitted in Birmingham, West Midlands: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout crash-rated bollards in Birmingham
We supply and fit crash-rated bollards throughout Birmingham, typically for sites such as city-centre plazas, office forecourts and university campuses. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Coverage in Birmingham takes in the B3, B4, B1, B2, B5 and B19 postcode districts. Jobs in Birmingham can be combined with work in Smethwick (2.9 miles), West Bromwich (4.7 miles), Shirley (5.9 miles) and Halesowen (6.7 miles) (straight-line distances). It sits roughly 12 miles from Wolverhampton as the crow flies.
Local details
- Area
- West Midlands, England
- Highway authority
- Birmingham City Council (local roads)
- Planning authority
- Birmingham City Council
- Postcodes
- B3, B4, B1, B2, B5, B19, B18 and B15
- Guide price
- Typically £1,995–£9,995 per bollard + VAT; minimum job £3,995
- Survey
- Free, with a fixed written quote
- Nearby
- Smethwick (2.9 mi), West Bromwich (4.7 mi), Shirley (5.9 mi), Halesowen (6.7 mi)
What Birmingham sites use crash-rated bollards for
Common uses in a place like Birmingham:
- Sites where a vehicle dynamics assessment shows a long straight run-up
- Data centres, utilities and critical infrastructure perimeters
- Building entrances and forecourts flagged in a security risk assessment
Birmingham: typical crash-rated bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Birmingham
In Birmingham, work on adopted pavements and verges needs consent from Birmingham City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Birmingham City Council) first — we flag this at survey.
Rated foundations are large, and excavation is often where projects run into trouble. Reinstatement matches paving, tactile surfaces and kerbs.
- Check that the test certificate matches the exact model, configuration and foundation being installed, and keep it with the site records.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
What happens on site
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Choosing the right spec
| Option | Detail |
|---|---|
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
| Heights and diameters | Exposed heights are commonly around 800 to 1,000 mm, with core diameters varying by model and rating. Larger diameters are not always needed to achieve a given rating. |
| Static rated bollards | Fixed posts for permanent lines where vehicles never need to pass. They are a straightforward rated option to install and maintain. |
What moves the price in Birmingham
When we price crash-rated bollards in Birmingham, these make the biggest difference:
- The rating required and the product range that achieves it
- Depth and volume of excavation, reinforcement and concrete
- Traffic management, restricted working hours or night work in occupied sites
Looking after them
Static rated bollards need little routine work, but they should be inspected periodically and always after any impact. Keep inspection records with the original test certificate so the line's condition can be shown to insurers or a security adviser.
If posts in Birmingham are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about crash-rated bollards in Birmingham
Do you install crash-rated bollards in Birmingham?
We cover all of Birmingham (B3, B4, B1, B2, B5 and B19) and the rest of West Midlands. We also work in Smethwick, West Bromwich and Shirley.
Do I need consent for crash-rated bollards on a public footway in Birmingham?
In Birmingham, work on adopted pavements and verges needs consent from Birmingham City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do crash-rated bollards cost in Birmingham?
In Birmingham, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.
Crash-rated bollards near Birmingham
- Smethwick (2.9 mi)
- West Bromwich (4.7 mi)
- Shirley (5.9 mi)
- Halesowen (6.7 mi)
- Solihull (6.8 mi)
- Sutton Coldfield (6.8 mi)