Bollard Installers

East Sussex · England

Driveway security posts for homes in Portslade

Local installation of driveway security posts in Portslade — free survey, fixed written price, and posts set to the right spacing for people and vehicles.

Black driveway security post locked upright in front of a parked car on a semi-detached house drivewayComputer-generated image

Portslade driveway security posts

Across Portslade, typical sites for driveway security posts include carports, new-build estate drives and front-garden parking spaces. The right one depends on the surface, the depth available and how often the post will be used.

We cover every part of Portslade in the BN41 postcode district. We also cover neighbouring Hove (2.3 miles), Brighton (3.5 miles), Rottingdean (7.2 miles) and Worthing (7.2 miles) — distances are straight-line. Portslade is about 3 miles from Brighton.

Portslade at a glance

Area
East Sussex, England
Highway authority
Brighton and Hove City Council (local roads)
Planning authority
Brighton and Hove City Council
Postcodes
BN41
Guide price
Typically £405–£895 per post inc VAT; minimum job £415
Survey
Free, with a fixed written quote
Nearby
Hove (2.3 mi), Brighton (3.5 mi), Rottingdean (7.2 mi), Worthing (7.2 mi)

Driveway security post prices in Portslade

SpecificationGuide priceIncludes
Standard£405–£615 inc VATStandard post, foundation, reinstatement
Upgraded£555–£755 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£705–£895 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.

What Portslade sites use driveway security posts for

Common uses in a place like Portslade:

  • Houses near stations, schools or shops where drives get borrowed
  • Homes with a high-value car or van parked outside
  • Drives where a gate would not fit or is not allowed

Consents, ground and services in Portslade

Brighton and Hove City Council is the highway authority covering Portslade's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

Many private-land installations in Portslade need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Brighton and Hove City Council before posts go in.

We scan and hand-dig before cutting deep for a telescopic cassette. Domestic drives hide more than people expect.

  • If the drive is shared or has a right of way over it, agree positions with the neighbour first.
  • Connect any cassette drainage to surface water or a soakaway, not to the foul drain.

What happens on site

Cut the surface

Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.

Fit the post

Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.

Make good and show you

The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.

Options to consider

OptionDetail
Keyed-alike locksTwo posts or more can be supplied so one key opens both, which helps households with several cars.
Semi-automatic postsRise on their own when unlocked and push down to lower. Easier for daily use than lifting a post.
FinishesBlack, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night.

What moves the price in Portslade

When we price driveway security posts in Portslade, these make the biggest difference:

  • Type of post: telescopic, fold-down, removable or semi-automatic
  • Finish and keyed-alike locks
  • Depth available and services under the drive

Looking after them

If the post becomes stiff, deal with it early, because a post that is awkward to use is a post that stops being locked. With telescopic and semi-automatic posts, lift the lid every few months and check the cassette is not holding water or silt.

If posts in Portslade are later hit or damaged, we can repair or replace them — see bollard repairs.

Questions about driveway security posts in Portslade

Do you install driveway security posts in Portslade?

We cover all of Portslade (BN41) and the rest of East Sussex. We also work in Hove, Brighton and Rottingdean.

Who gives permission for bollards on the pavement in Portslade?

The highway authority for local roads in Portslade is Brighton and Hove City Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

How much do driveway security posts cost in Portslade?

In Portslade, typically £405–£895 per post, supplied and installed, including VAT, with a minimum job of £415 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.

What if I lose the key to my driveway post?

Keep the spare somewhere safe. If both are lost, many lock cylinders can be replaced, but sometimes the lock has to be drilled. That is a paid repair visit, so a spare key is worth having.

Do I need two posts for two cars?

Not always. On a narrow drive where one car parks behind the other, one post at the front may be enough. On a wide drive with cars side by side, two posts are usually needed to block both.

Driveway security posts in nearby towns

More from us in Portslade

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote