Inverclyde · Scotland
Driveway security posts for homes in Port Glasgow
Driveway security posts for sites across Port Glasgow and the rest of Inverclyde, from the first measurement to the last relaid paving block.
Computer-generated imageAbout driveway security posts in Port Glasgow
We supply and fit driveway security posts throughout Port Glasgow, typically for sites such as shared drives, driveways and private parking bays. The common types are telescopic posts that retract into the ground, fold-down posts that hinge flat, and removable posts that lift out of a socket.
Coverage in Port Glasgow takes in the PA14 and PA13 postcode districts and nearby places like Kilmacolm. Nearby, we also work in Greenock (2.9 miles), Gourock (5.3 miles), Erskine (9.6 miles) and Johnstone (9.9 miles), measured as the crow flies. Glasgow is around 17 miles away.
Key facts for this area
- Area
- Inverclyde, Scotland
- Roads authority
- Inverclyde Council (local roads)
- Planning authority
- Inverclyde Council
- Postcodes
- PA14 and PA13
- Guide price
- Typically £385–£845 per post inc VAT; minimum job £395
- Survey
- Free, with a fixed written quote
What driveway security posts cost in Port Glasgow
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £525–£715 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £665–£845 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Driveway security posts in Port Glasgow: common uses
Around Port Glasgow, driveway security posts usually solve one of these:
- Houses near stations, schools or shops where drives get borrowed
- Drives where a gate would not fit or is not allowed
- Homes worried about keyless or relay car theft
Before we dig in Port Glasgow
For anything on the public footway in Port Glasgow we check with the roads authority first — Inverclyde Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Many private-land installations in Port Glasgow need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Inverclyde Council before posts go in.
Domestic drives hide more than people expect. The water supply pipe, gas service and electric cable all cross the front garden, often at shallow depth and rarely where you would guess, and older drives may cover inspection chambers or soakaways.
- Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the roads authority's agreement.
- Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
What happens on site
Mark the position
The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.
Fit the post
Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.
Make good and show you
The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.
Options to consider
| Option | Detail |
|---|---|
| Removable posts | Lift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out. |
| Fold-down posts | Hinged posts bolted down with resin anchors. Quick to fit and no digging, but need a solid base to fix into. |
| Keyed-alike locks | Two posts or more can be supplied so one key opens both, which helps households with several cars. |
What moves the price in Port Glasgow
Two Port Glasgow jobs with the same number of posts can price quite differently. The usual reasons:
- Drive surface and how visible a repair will be
- Depth available and services under the drive
- Type of post: telescopic, fold-down, removable or semi-automatic
After installation
Use the post regularly and keep the lock lubricated, especially before winter. With telescopic and semi-automatic posts, lift the lid every few months and check the cassette is not holding water or silt.
If posts in Port Glasgow are later hit or damaged, we can repair or replace them — see bollard repairs.
Driveway security posts in Port Glasgow: FAQs
Do you install driveway security posts in Port Glasgow?
We cover all of Port Glasgow (PA14 and PA13) and the rest of Inverclyde. We also work in Greenock, Gourock and Erskine.
Who gives permission for bollards on the pavement in Port Glasgow?
Port Glasgow falls under Inverclyde Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for driveway security posts in Port Glasgow?
In Port Glasgow, typically £385–£845 per post, supplied and installed, including VAT, with a minimum job of £395 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will fitting a post damage my block paving?
Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.
What if I lose the key to my driveway post?
Keep the spare somewhere safe. If both are lost, many lock cylinders can be replaced, but sometimes the lock has to be drilled. That is a paid repair visit, so a spare key is worth having.
Driveway security posts near Port Glasgow
- Greenock (2.9 mi)
- Gourock (5.3 mi)
- Erskine (9.6 mi)
- Johnstone (9.9 mi)
- Clydebank (11.2 mi)
- Largs (11.7 mi)