Inverclyde · Scotland
Ram-raid protection bollards in Port Glasgow
Ram-raid bollards supplied and fitted in Port Glasgow, Inverclyde: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRam-raid bollards in Port Glasgow
In the town of Port Glasgow, ram-raid bollards tend to go in at filling-station forecourts, small industrial units and high street shopfronts. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Port Glasgow's PA14 and PA13 postcode districts, including places such as Kilmacolm. Jobs in Port Glasgow can be combined with work in Greenock (2.9 miles), Gourock (5.3 miles), Erskine (9.6 miles) and Johnstone (9.9 miles) (straight-line distances). It sits roughly 17 miles from Glasgow as the crow flies.
Port Glasgow at a glance
- Area
- Inverclyde, Scotland
- Roads authority
- Inverclyde Council (local roads)
- Planning authority
- Inverclyde Council
- Postcodes
- PA14 and PA13
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
Ram-raid bollards in Port Glasgow: common uses
Typical reasons Port Glasgow sites choose ram-raid bollards:
- Filling station kiosks and forecourt shops
- Through-the-wall and freestanding ATMs
- Warehouses and trade counters with roller-shutter entrances
What ram-raid bollards cost in Port Glasgow
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Port Glasgow
Port Glasgow falls under Inverclyde Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
Many private-land installations in Port Glasgow need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Inverclyde Council before posts go in.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
From survey to handover
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Specification choices
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
What moves the price in Port Glasgow
Our Scotland guide prices are a starting point; the survey in Port Glasgow firms them up. What tends to move them:
- Number of posts across the frontage or ATM
- Foundation depth and what is found under the pavement
- Out-of-hours working to avoid closing the shop
Keeping them working
Ram-raid bollards are robust but not maintenance-free. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
We can also service, repair or replace existing posts anywhere in Port Glasgow.
Ram-raid bollards in Port Glasgow: FAQs
Can you install ram-raid bollards anywhere in Port Glasgow?
We cover all of Port Glasgow (PA14 and PA13) and the rest of Inverclyde. We also work in Greenock, Gourock and Erskine.
Who gives permission for bollards on the pavement in Port Glasgow?
For anything on the public footway in Port Glasgow we check with the roads authority first — Inverclyde Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do ram-raid bollards cost in Port Glasgow?
In Port Glasgow, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the roads authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Ram-raid bollards near Port Glasgow
- Greenock (2.9 mi)
- Gourock (5.3 mi)
- Erskine (9.6 mi)
- Johnstone (9.9 mi)
- Clydebank (11.2 mi)
- Largs (11.7 mi)